Contact center

Contivio

< Back to All Connectors
Connect your AI to Contivio
Contact center managers, quality assurance analysts, and team leads review calls, call segments, and agent activity in Contivio, but the answers they need are spread across separate records and exports. AI can bring them together in seconds, but only if it surfaces call data the signed-in user is permitted to see and does not expose recording links or customer details beyond what the question needs.

‍

Start a Trial
Get a Live Demo

Why it matters

Capabilities that matter most for Contivio

01

Calls, segments and agent activity

Look up call records, the segments of each call, and agent activities by type, channel and contact center, filtered by date, agent, queue or customer.
02

Call summaries in the answer

Contivio's AI call summaries come back with durations, results and direction, so a question about a call gets context without opening the recording.
03

Governed by the signed-in user

Call data carries customer identifiers and notes. Answers stay within what the user is permitted to see, and recording links and customer details are not exposed beyond the question.
03

Pre-built tools and prompts

Ready-made tools for calls, call segments and agent activities, plus prompts for agent reviews, queue performance and tracing a call end to end.
05

Paired with your CRM and ticketing

Cross-connector prompts match Contivio calls to Salesforce, HubSpot, Zendesk, NetSuite and other systems, so a call can be checked against the customer record.

Use cases

Example AI Use Cases for Contivio

Filters

scenario

-

After a call ends, the outcome lives in the Contivio contact center while the customer record sits in Dynamics GP. Someone retypes the date, agent, result and summary into a customer note, or forgets it, and with several similar accounts the note can land on the wrong customer or over an older one.

What popdock provides

--

Give a Contivio call and a Dynamics GP customer, and it reads the call, then looks up the customer in Dynamics GP. It compares the customer phone number with the call numbers and warns you if they do not match, asking you to confirm the customer again. It drafts a short note with the date, direction, agent, result, duration and summary, shows it with the customer name, and writes nothing until you say yes. Then it adds exactly one note to the existing customer note, never overwriting what is there.

Business outcome

---

Call outcomes reach the right Dynamics GP customer note once, appended after you approve the wording, with nothing overwritten and no retyping.
See Full Use Case

scenario

-

Technicians and dispatchers copy call details from the contact center into Dynamics GP service calls by hand. Context gets shortened or lost, and a note can land on a closed service call or on the wrong record when a number is mistyped.

What popdock provides

--

Give a Contivio call and a Dynamics GP service call number, and it reads the call and the service call. It stops if the number matches no record or more than one, and tells you if the service call is complete or closed before asking again. It also checks the customer phone number against the call and warns you on a mismatch. You see the drafted note with the service call number and status, and one note is appended only after you say yes. Service calls are never created or updated.

Business outcome

---

Call context lands on the right open service call, appended once after approval, with no copying and no change to the service call itself.
See Full Use Case

scenario

-

When a customer phones about an open ticket, the call details stay in the contact center system. The next agent opens the Freshdesk ticket without the phone history, and pasting a summary by hand risks putting it on the wrong ticket or in a reply the customer can see.

What popdock provides

--

Give a Contivio call and a Freshdesk ticket, and it reads the ticket and the call, then checks that the caller number matches the ticket requester and warns you if the call may belong to someone else. You see the exact note with call id, time, direction, agent, queue, result, duration and summary, and nothing is written until you say yes. It adds one private note only, never a customer-visible reply, and asks first if the ticket is closed.

Business outcome

---

The next agent sees the phone history on the Freshdesk ticket as a private note, added once after you confirm the text.
See Full Use Case

scenario

-

New callers show up in the contact center and are typed into the CRM by hand. Names are spelled differently, a phone number gets a digit wrong, and a person who is already in Attio under another spelling ends up with a second record, which someone has to find and merge later.

What popdock provides

--

Give a Contivio call and the name to use, and it reads the call to get the customer number. It then checks Attio for an existing person by name and by phone number, and stops with the existing record if it finds one. You see the person it will create, with name, phone number, optional job title and the call summary, and nothing is saved until you say yes. It adds one person only, then checks Attio to confirm the record exists. It never updates or deletes anyone.

Business outcome

---

Callers who are not in Attio get one clean person record with the right number, with duplicates caught first and nothing added unconfirmed.
See Full Use Case

scenario

-

New callers are either never entered into the CRM or are entered twice under slightly different names. Nutshell cannot be searched by phone number, so checking whether the caller already exists means comparing numbers by eye, which few people do when the queue is busy.

What popdock provides

--

Give a Contivio call and the name to use, and it reads the call for the customer number and summary. It searches Nutshell by name and compares phone numbers digit for digit, and if anyone matches it reports them and stops. If the number is withheld it stops rather than guess. You see the person it will create, with a description built from the call date and summary, and nothing is saved until you say yes. It creates one person only and never updates or deletes.

Business outcome

---

Callers get a Nutshell person once, after a number comparison and your confirmation, so the CRM stops collecting near duplicate names.
See Full Use Case

scenario

-

Finding out how an agent spent their time means scrolling through raw activity logs for the period. Counting by type, channel and contact center, and spotting long gaps or odd status changes by hand, is slow, tedious and easy to get wrong.

What popdock provides

--

Give an agent name and a date range, and optionally one activity type, and it pulls that agent's logged activities from Contivio. It counts the records by activity, channel and contact center, lists the sequence of activities for each day, and notes unusually long gaps. If several agents match the name it lists them and asks which you mean. Nothing is changed, customer details are kept to what the question needs, and it reports what the records show rather than judging performance.

Business outcome

---

Supervisors see what an agent did in a period as counts and a flagged list, without reading raw logs and without any data changed.
See Full Use Case

scenario

-

Before a deal conversation, a rep reads the OnePageCRM deal, its notes and open actions, then searches the contact center call log for what the contact said. The phone history sits in another system, so it is easy to walk in without knowing the last call, or that the contact has gone quiet.

What popdock provides

--

Give a deal name and optionally how many days to look back, 30 by default. It finds the deal in OnePageCRM and stops to list the candidates if the name matches more than one. It reads the deal stage, amount, status and expected close date, the primary contact, recent notes and open actions, then finds that contact's Contivio calls by matching the phone number on its last 9 digits. You get the call count, last call date, outcomes and the summaries of the latest three, plus a line on whether the contact is going cold. Nothing in OnePageCRM is changed.

Business outcome

---

Reps walk into a deal conversation knowing the stage, open actions and latest calls, and whether the contact has gone quiet.
See Full Use Case

scenario

-

Preparing for a deal meeting means reading the Attio deal and its people, then hunting through call logs for what was actually said. The phone history lives in another system, so context is patchy, the last call is easy to miss and key themes get lost.

What popdock provides

--

Give a deal name, and optionally how many days of calls to look at, 60 by default. It finds the deal in Attio and stops to list candidates if more than one matches. It reads the stage, value, owner, company and associated people, collects each person's phone numbers, emails and job title, then finds their Contivio calls by matching the last 9 digits of the number. You get the deal summary, calls per person, themes drawn only from the call summaries, and days since the last call. Nothing in Attio is changed and nothing is invented.

Business outcome

---

Reps get a pre-meeting brief grounded in what was actually said on calls, in minutes and without touching the Attio records.
See Full Use Case

scenario

-

An agent reviewing a call has to look in the phone system for the call, then in the ERP for the caller's balance, open invoices and recent orders. The two systems share no easy link, so it is common to pick the wrong customer with a similar name or to rely on a phone number alone.

What popdock provides

--

Give a Contivio call, and a customer number or name for the Business Central customer. It reads the call, then finds the customer in Dynamics 365 Business Central, stopping to list candidates if more than one matches and reporting clearly if none do. It never guesses a customer from a phone number alone, though it tells you whether the customer phone number agrees with the call. You get the call details, the customer balance, balance due, credit limit and blocked status, open invoices and recent orders, plus a note on anything an agent should know. Nothing is written to Business Central.

Business outcome

---

Agents see the right customer's balance, open invoices and recent orders next to the call, without guessing who the caller is.
See Full Use Case

scenario

-

Sales managers have a list of open leads in Nutshell but no view of which ones have had real phone contact. Answering means finding each lead's people and numbers, then searching call logs for each one, and a lead without phone numbers is easily mistaken for one that has gone quiet.

What popdock provides

--

Optionally name an owner and a number of days to look back, 14 by default. It reads the open leads in Nutshell, collects the phone numbers of the people on each, then checks the Contivio call log for calls to or from those numbers, comparing digits only. You get two tables, leads with calls and leads with none, ordered by expected close date, with counts. Leads whose people have no phone numbers go in a separate cannot be checked list rather than being shown as quiet. Nothing is changed in either system.

Business outcome

---

Managers see which open leads have had real phone contact and which have gone quiet, with unverifiable leads kept apart.
See Full Use Case

scenario

-

Reps and managers cannot easily see whether a large open NetSuite opportunity has had any real phone contact. The opportunity lists a company name, the call log is keyed differently, and matching the two by hand is slow and error prone.

What popdock provides

--

Give a minimum projected total and optionally how many days to look back, 30 by default. It finds NetSuite opportunities at or above that value, keeps the 10 largest, and resolves each company to a single NetSuite customer, listing the company as not matched rather than guessing if none or several fit. It then checks Contivio for that customer's calls in the window. For each opportunity you get the title, company, projected total, expected close date, call count, latest call date and result, and a short note from the latest call summary. Nothing is changed.

Business outcome

---

Large opportunities with no recent phone contact stand out, and unmatched companies are listed instead of guessed, in a read-only report.
See Full Use Case

scenario

-

Collections staff chase overdue invoices without knowing whether anyone has already phoned the customer. The invoice list lives in the accounting system and the call history in the contact center, so some customers get repeat calls while others are never contacted.

What popdock provides

--

Optionally set how many days of calls to look at, 30 by default, and how many customers to check, 10 by default. It finds the overdue Rillet invoices, totals the amount due per customer, ranks them largest first, and attaches customer names. It then checks Contivio for calls to or from each customer using the customer id, never guessing from names or phone numbers. You get a table with the overdue total, oldest due date, invoice count, calls in the window and the latest call, and a list of customers nobody has contacted. It stops if either system returns nothing, and changes nothing.

Business outcome

---

Collectors see which overdue customers have already been called and which nobody has contacted, so effort goes where it is missing.
See Full Use Case

scenario

-

Finding out which clients with overdue FreshBooks invoices have actually been contacted means producing an aging list, then checking the call log client by client. It is slow, and the clients who were never called are the ones that slip through.

What popdock provides

--

Optionally set how many days of calls to look at, 30 by default, and how many clients to check, 10 by default. It finds invoices past due with an outstanding balance, totals them per client and keeps the largest balances. It then checks Contivio for recent calls with each client and shows the organization, total outstanding, oldest due date, number of calls and the last call result, marking clients with none as no contact. If no client matches at all, it says the client ids may not line up with Contivio customer ids. It reads only, and never sends or changes invoices.

Business outcome

---

Finance sees which overdue clients have had no call, largest balances first, so follow-up goes to the clients who need it.
See Full Use Case

scenario

-

Finding which customers with large unpaid invoices have not been called means running an invoice report, totalling it per customer, then checking call logs customer by customer. It is slow, and a mismatch between the two systems' customer ids can quietly hide the problem.

What popdock provides

--

Give a minimum unpaid amount and a latest invoice date, and optionally how many days of calls to look at, 14 by default. It finds the unpaid NetSuite invoices, totals them per customer and keeps the 15 largest. It then checks Contivio for calls with each customer using the NetSuite customer id and notes the latest call time, result and agent, or marks no recent call. You get a table with email, invoice count, total unpaid, oldest invoice date and last call, plus the count with no recent call. If no customer shows any calls, it warns that the ids may not match between systems. Nothing is changed.

Business outcome

---

Collectors see which customers with large unpaid NetSuite balances have had no recent call, with an id mismatch flagged instead of hidden.
See Full Use Case

scenario

-

Collectors cross-check overdue Wave invoices against call logs by hand. Wave and the contact center share no customer id, so the only link is a phone number in different formats, and customers who were never called are easy to miss.

What popdock provides

--

Optionally give a minimum amount due, and how many days of calls to look at, 14 by default. It lists overdue Wave invoices, groups them by customer, and looks up each customer's phone and mobile numbers. It then checks Contivio for calls to or from those numbers, comparing digits only, and records the latest call date, result and summary. You get a table sorted by amount due with customers not contacted first. Numbers with no match are reported as unmatched, and if one number fits several customers it lists the candidates instead of choosing. Nothing is sent or changed.

Business outcome

---

Collectors start with the overdue customers nobody has called, with unmatched numbers shown instead of dropped, and no invoice is touched.
See Full Use Case

scenario

-

Collections teams cannot tell which overdue customers have already been called, so some get repeat calls and others none. Finding out means working out who is overdue in Dynamics GP, then searching the call log customer by customer.

What popdock provides

--

Optionally give an as-of date, a minimum balance (1,000 by default) and how many days of calls to look at (14 by default). It finds Dynamics GP customers with a balance above the minimum and invoices past due on that date, keeping those in both. For up to 20 customers, highest balance first, it checks Contivio for calls by customer id, falling back to the customer's phone number. You get a table with balance, overdue amount, oldest due date, calls and the last result, uncontacted customers first. It says how many customers were left out above 20, stops if none are overdue, and never writes.

Business outcome

---

Collectors see which overdue Dynamics GP customers have had no call and which were already contacted, so calls are not repeated or missed.
See Full Use Case

scenario

-

Nobody can tell whether collection calls actually lead to payment without matching call logs to receipts by hand. It means listing an agent's calls, finding each customer's payments in the accounting system, and working out which came after which call.

What popdock provides

--

Give an agent name, a date range, and optionally a payment window, 14 days by default. It reads that agent's calls from Contivio, keeping only calls that carry a customer id, then looks up each customer's payments in Intacct and the current total due. It checks whether a payment arrived within the window after a call. You get a table with call date, result, payment yes or no, amount and date, and total due, plus counts of calls reviewed, customers who paid, customers who did not, and calls with no customer id. It says plainly that a payment after a call shows sequence, not cause, and changes nothing.

Business outcome

---

Managers see whether an agent's collection calls were followed by payments, with the limits of the evidence stated and nothing changed.
See Full Use Case

scenario

-

Managers want to know whether the CRM reflects the calls a person actually handled. Answering means totalling calls and talk time in the contact center, then counting logged calls and done activities in Pipedrive, and the person's name may be spelled differently in each system.

What popdock provides

--

Give a person's name and a date range. It reads that person's Contivio calls and talk time, and their logged-in and break activity, asking you to pick if several agents match. It finds the matching Pipedrive user, stopping to list candidates unless exactly one fits, then counts their logged calls and done activities for the same range. You get a side-by-side table of calls handled against calls logged, talk time against logged duration, and done activities, and a flag when logged calls fall short by more than 20 percent. Both name spellings are shown, no ratio is given when one side is empty, and nothing is changed in either system.

Business outcome

---

Managers see whether Pipedrive reflects the calls a person handled, with shortfalls flagged and no ratios drawn from empty data.
See Full Use Case

scenario

-

A manager who wants to know whether a deal owner's pipeline is backed by real phone activity has to export the owner's deals from Attio, then pull the same person's calls from Contivio and line the two up by hand. Names are spelled differently in each system, so high-value deals with no calls are easy to miss.

What popdock provides

--

Give the deal owner's name or email and, if you like, how many days to look back (14 by default). It reads the owner's deals in Attio, then the same person's calls in Contivio, and reports deal count and value by stage, call count and talk time, and calls per deal where a call summary mentions the deal's company. Stages with large value and no calls are flagged. It is read only, nothing in Attio or Contivio is changed, and it says plainly when agent names do not match so the join may be incomplete.

Business outcome

---

Managers see in one answer whether a deal owner's pipeline is matched by real call activity, and where high-value stages have gone quiet.
See Full Use Case

scenario

-

Supervisors see an agent's call load in the contact center system and their follow-up tasks and appointments in the CRM, on separate screens. Matching the right person in both and adding it up by hand is slow, and the raw numbers are easily read as a verdict on the agent.

What popdock provides

--

Give an agent's name and a date range. It reads the agent's calls and recorded activity in Contivio, finds the same person among the Dynamics 365 Sales users, and reads their tasks and appointments for the same dates. You get calls handled, talk time and activity breakdown beside tasks due, their status and appointments held, with one short note on whether the load looks balanced. It is read only, matches the agent only when the name is unambiguous, and reports workload facts rather than a rating.

Business outcome

---

Supervisors see an agent's call load and CRM follow-up side by side, as workload facts rather than a performance rating.
See Full Use Case

scenario

-

To tell whether an agent's phone workload is matched by CRM upkeep, a supervisor pulls call and activity figures from Contivio, then notes and tasks from Capsule CRM, and lines them up by hand. Nicknames and name order differ between the systems, so the wrong person is easy to compare.

What popdock provides

--

Give an agent's name and how many days to look back (14 by default). It reads the agent's calls, talk time and logged activities in Contivio, then checks Capsule CRM for exactly one matching user before reading the notes they wrote and the tasks they own. The report sets calls against notes, talk hours against CRM entries and open against completed tasks, gives the ratio of notes to calls and names the days with calls but no CRM entries. It is read only and stops if it is not sure the agent is the same person in both systems.

Business outcome

---

Supervisors see whether an agent's calls are being recorded in Capsule CRM, and which days have calls but no notes.
See Full Use Case

scenario

-

A manager adding up one agent's work gets call counts from the phone system and ticket, time and satisfaction figures from the help desk. The two reports cover different things, the agent's name is spelled differently in each, and the totals rarely line up.

What popdock provides

--

Give an agent's name and a date range. It finds the agent in Freshdesk, stopping if more than one matches, then reads their Contivio calls, handle and talk time, call results and recorded activity, and their Freshdesk tickets, logged time and satisfaction ratings. You get one table of calls handled, average handle time, tickets assigned and resolved, hours logged and average rating, plus a short note on how the agent splits time between phone and tickets. It is read only, says the match is by name, and shows no data rather than zero when a side is empty.

Business outcome

---

Managers see an agent's phone and ticket work in one table, with empty sides shown as no data rather than a misleading zero.
See Full Use Case

scenario

-

Call statistics sit in the contact center system and open cases in Salesforce, so a supervisor has to check both before noticing that an agent has heavy call volume and a stack of high-priority cases. By then the agent is already overloaded.

What popdock provides

--

Give an agent's name and how many days to look back (14 by default). It reads their Contivio calls, talk and handle time and activity, finds the same person among the Salesforce users, then counts their open cases, cases opened in the window and open cases by priority. The summary ends with a flag where the two pictures clash, such as heavy call volume with many open high-priority cases. It is read only, stops on ambiguous names and shows both spellings it used.

Business outcome

---

Supervisors spot an agent whose calls and open cases are piling up together, before the queue notices.
See Full Use Case

scenario

-

Judging an agent from the phone system alone, or the help desk alone, makes someone who splits their day between calls and tickets look under-used. Combining the two means pulling call and activity figures, then ticket counts, and totalling them by hand.

What popdock provides

--

Give an agent's name and a period (the last 7 days by default). It reads their Contivio calls by direction and result with talk and handle time and their recorded activity, then their Zendesk tickets by status and priority. One table shows calls, talk time, handle time, activity breakdown, tickets assigned and tickets still open, with two sentences on whether the agent is mainly on the phone or on tickets. It is read only, and if the exact name finds nothing it retries with a partial match and lists the names it matched.

Business outcome

---

Supervisors judge an agent on phone and ticket work together, so someone who splits their time is not mistaken for under-used.
See Full Use Case

scenario

-

Finding out whether a customer paid after being phoned means looking up their payments in the invoicing system and their calls in the phone system, then lining up the dates by hand. The two systems share no customer id, so the only link is a phone number written in different formats.

What popdock provides

--

Give a Wave customer's name and how many days to look back (30 by default). It finds the customer in Wave, stopping if more than one matches, reads their invoice payments, then picks out the Contivio calls whose numbers match the customer's phone or mobile, comparing digits only. You get one timeline, oldest first, mixing calls and payments, with any payment dated within 7 days after a call noted. It is read only, says plainly that this shows timing and not cause, and reports numbers that match nothing instead of dropping them.

Business outcome

---

Finance sees when payments followed collection calls in one timeline, without treating timing as proof that a call caused the payment.
See Full Use Case

scenario

-

To see whether calls to a customer led to orders, someone has to list the customer's calls in the phone system, then their sales orders and invoices in the ERP, and compare the dates by hand. With more than one currency in play, totals are easy to get wrong.

What popdock provides

--

Give a Business Central customer number and a date range. It reads the customer's Contivio calls, then their sales documents in Dynamics 365 Business Central for the same dates, and marks each call as followed by a document on the same day or within 3 days, or not followed. Documents with no call in the 3 days before are listed as unrelated to a call. You get a combined table in date order with totals. It is read only, states that timing is not proof of cause, and never totals amounts across different currencies.

Business outcome

---

Sales teams see which calls were followed by orders and which orders had no call, with amounts kept separate by currency.
See Full Use Case

scenario

-

Call volume lives in the phone system and ticket volume in the help desk, so the channel mix and each team's load are guessed. Counting calls per queue and tickets per group takes two exports and a manual decision about which queue belongs with which team.

What popdock provides

--

Give a period (the last 7 days by default). It counts Contivio calls per queue, including inbound calls and those abandoned or unanswered, and Zendesk tickets per group and by status. Queues and groups are matched by name where they clearly look alike, such as Billing with Billing, and the rest are listed separately, along with queues that have many calls but few tickets and the reverse. It is read only, flags counts that hit the record cap as truncated, and asks you for a mapping rather than forcing a match.

Business outcome

---

Leaders see call and ticket volume per team side by side, with truncated counts and unclear matches flagged instead of hidden.
See Full Use Case

scenario

-

To judge whether a client's phone support is justified by what they are billed, you add up call time in the phone system, then billable hours and payments in the accounting system. The data sits in two places, so the question rarely gets answered.

What popdock provides

--

Give a client id and a start date (90 days ago by default). It adds up the client's Contivio calls, call hours and handle time, then their FreshBooks time entries split into billable and non-billable hours and the payments received. One table shows calls, call hours, billable and non-billable hours and payments, with two sentences on whether the client takes more contact time than their billing suggests. It is read only, states the date range used, does not expose recordings or extra customer detail, and reports an empty side as zero while noting the other side is still valid.

Business outcome

---

Leaders see whether a client's phone support effort is justified by what they are billed and pay, from one summary.
See Full Use Case

scenario

-

Problems reported by phone should become service calls, but nobody checks. Comparing a customer's phone calls with their Dynamics GP service calls means reading both lists and matching dates by hand, and time zones can make a same-day match look like a miss.

What popdock provides

--

Give a Dynamics GP customer id and a start date (60 days ago by default). It reads the customer's service calls in Dynamics GP and their Contivio calls, falling back to the phone number on the customer record when no calls are keyed to the customer id. Each service call is paired with phone calls on the same day or the day before. You get three lists, service calls with a phone call, service calls without one and phone calls with no service call, with the agent and call summary, plus one line on the likely gap. It is read only, treats a one-day difference as a match and still lists one side when the other is empty.

Business outcome

---

Operations teams find customer calls that never became service calls, so problems reported by phone are not left unlogged.
See Full Use Case

scenario

-

Managers add up an agent's calls in the phone system and their incidents in the service desk, and the two views are never compared. Pulling both for the same dates and matching the person by hand takes time, and a busy agent can look idle on one screen.

What popdock provides

--

Give an agent's name and a date range. It totals the agent's Contivio calls, handle and talk time, call results and activity types, then finds the same person among the ServiceNow users, noting their title, department and manager. It counts their incidents opened by state and priority and lists any priority 1 or 2 incident still open. One table covers calls, handle time, results, incidents opened, incidents still open and high priority open, with two sentences on whether phone and ticket load look balanced. It is read only, stops on ambiguous users and reports only the named agent, with no ranking.

Business outcome

---

Managers see one agent's phone load and incident load together, without ranking them against anyone else.
See Full Use Case

scenario

-

Before an agent can help someone, they piece together that person's history from two systems: the incidents they raised in the service desk and the calls they made to the contact center. Finding the person in both, matching phone numbers and ordering the events by date takes time while the caller waits.

What popdock provides

--

Give the person's email and, if you like, how many days to look back (30 by default) and a customer id. It finds the person among the ServiceNow users, reads their incidents, then reads the Contivio calls that match by customer id, or by phone number with spaces, dashes and country code ignored. You get one list in time order mixing calls and incidents, ending with one line on open issues and when the person last called. It is read only, says which calls matched by customer id and which by phone, and calls a shared phone number ambiguous rather than guessing.

Business outcome

---

Agents see a person's calls and incidents in one timeline, with every phone match explained, before they pick up the conversation.
See Full Use Case

scenario

-

Reps rarely know how often a customer with a deal about to close has called the contact center, so risk or silence goes unnoticed until the deal slips. Finding out means listing closing opportunities in Salesforce, then searching the phone system account by account.

What popdock provides

--

Say how many days ahead to look for closing deals (30 by default), the lookback for calls, and optionally a minimum amount. It reads the open Salesforce opportunities closing in that time, caps the list at the 30 largest and says how many were left out, then reads each account's Contivio calls. One table shows each opportunity with its amount, stage and close date, call count, talk minutes, latest call and result, and the latest call summary, with accounts flagged silent or busy. It is read only, and if no calls come back it warns that Contivio may key customers differently instead of calling every deal silent.

Business outcome

---

Sales teams see which closing deals have gone quiet or are drawing many calls, without calling every deal silent by mistake.
See Full Use Case

scenario

-

When calls surge on a queue, nobody connects it to the outage or alert behind it until long afterwards. Working it out means counting calls by hour in the phone system, then scrolling through alerts and priority incidents in the service desk to see what started just before.

What popdock provides

--

Give a queue and a date. It counts that day's Contivio calls per hour, names the busiest hours and reads the common results and a sample of call summaries for the topic. It then reads the ServiceNow alerts for the day and the priority 1 and 2 incidents opened that day, and lists the ones created in the two hours before each busy hour, noting whether call summaries mention the same service. You get hourly counts, candidate causes and a verdict of likely related, possibly related or no link found. It is read only, never acknowledges alerts or changes incidents, and treats timing as a hint, not proof.

Business outcome

---

IT teams link a call surge to the likely alert or incident behind it within minutes, instead of piecing it together after the event.
See Full Use Case

scenario

-

Callers who are not in the CRM go unnoticed, so new demand is never captured. Finding them means exporting the calls from the phone system, exporting the contacts from the CRM and comparing phone numbers that are written in different formats.

What popdock provides

--

Say how many days to look back (7 by default) and optionally a queue. It reads the Contivio calls, takes the customer number from each, then reads Nutshell contacts and compares phone numbers by digits only. You get the numbers that match no Nutshell contact ranked by call count, with the last call, queue, most common result and one call summary, ending with matched against unmatched counts. It is read only, and if the contact list reaches its limit it warns that the list may be incomplete and the unmatched count overstated.

Business outcome

---

Marketing sees which repeat callers are missing from Nutshell, so new demand can be followed up and captured.
See Full Use Case

scenario

-

Agents check the contact center system for a contact's calls and the CRM for their notes, cases and deals as separate jobs, and the two pictures never line up. Calls carry only phone numbers, so matching them to a CRM contact is done by hand.

What popdock provides

--

Give a contact's name and, if you like, how many days of calls to look back (30 by default). It finds the person in Capsule CRM, stopping to ask which one if several match, then reads their Contivio calls and keeps those whose number matches the contact's phone, comparing digits only and never by name alone. It adds their notes and activity, open cases and opportunities from Capsule CRM. The report shows the contact, a dated list of matched calls, open cases and deals, the last three CRM entries and one line on whether the CRM entries reflect the calls. It is read only, and empty fields are reported as not recorded.

Business outcome

---

Agents see a contact's calls, notes, cases and deals in one answer, matched by phone number and never guessed from a name.
See Full Use Case

scenario

-

A customer's phone calls and support tickets live in two systems and are pieced together by hand. Finding the contact in the help desk, listing their tickets, then hunting through the phone system for calls from their number takes time, and the number formats rarely match.

What popdock provides

--

Give the customer's email and, if you like, how many days to look back (60 by default). It finds the contact in Freshdesk, reads their tickets, then reads Contivio calls and keeps those whose number matches the contact's phone or mobile, comparing digits only. You get one table sorted by time, mixing tickets and calls with the agent, summary and outcome, and two sentences on the pattern, such as repeat calls about one open ticket. It is read only, flags a call list that may be truncated, shows the other side and says which is empty when one side returns nothing, and never guesses a Freshdesk agent from a Contivio name.

Business outcome

---

Support teams see a customer's tickets and calls in one timeline, so repeat contacts and open issues stand out.
See Full Use Case

scenario

-

To see how a customer has been treated, a support lead opens the contact center to find the account's calls, then Salesforce to find its cases, and lines the dates up in a spreadsheet. The call that led to a case is easy to miss, and the customer ids in the two systems do not always match.

What popdock provides

--

Give a Salesforce account id and how many days to look back, 30 by default, and it confirms the account exists in Salesforce before anything else. It then reads the account's Contivio calls and its Salesforce cases and merges them into one timeline sorted by time, with the agent or case owner, queue or priority, result or status and a short summary on each row. You also get counts of calls and cases, how many cases are open, and any call made within a day before a case was opened. It is read-only, and if the ids do not match across systems it says so rather than guessing.

Business outcome

---

One timeline of an account's calls and cases, with call-then-case links flagged and nothing changed in either system.
See Full Use Case

scenario

-

Quality reviewers want to know which calls in a queue never produced a ServiceNow incident, but the contact center and ServiceNow do not talk to each other. They export calls, export incidents per agent and compare times by eye, so unlogged work goes unseen and some calls are matched to the wrong incident.

What popdock provides

--

Give a queue, a date range and how many minutes after the call an incident may be opened, 60 by default. It reads the calls from Contivio, skips abandoned and voicemail calls and calls of a minute or less, and says how many it skipped. It then checks ServiceNow for incidents opened by the same agent in that window, lets each incident match only one call, and lists the calls with no match. It reads at most 200 calls, tells you when the list is capped, and reminds you an unmatched call may be legitimately ticket-free. Nothing is changed in either system.

Business outcome

---

Calls with no matching incident are listed for a supervisor to check, without exporting or comparing anything by hand.
See Full Use Case

scenario

-

A follow-up promised on a call is jotted on paper or kept in memory, and often never reaches the donor database as a task. Entering it by hand means finding the call, finding the right constituent from the phone number, and checking a task is not already open.

What popdock provides

--

Give a call and optionally a due date and a subject, and it reads the call in Contivio, then finds the matching Bloomerang constituent from the caller's phone number. If there is no match or more than one, it stops and says so. It checks Bloomerang for an open task with a similar subject and shows it instead of adding a duplicate. You then see the exact task, with the call summary as the note, and nothing is saved until you say yes. It adds one task only and never changes Contivio.

Business outcome

---

Promised follow-ups become Bloomerang tasks on the right constituent, once, with the call summary attached.
See Full Use Case

scenario

-

When a customer places an order by phone, someone retypes it into the ERP from the call notes. Slips creep in, the same call gets entered twice, and an order can be raised for a customer who is blocked or does not exist.

What popdock provides

--

Give a call and a customer number, and optionally a requested delivery date. It reads the call in Contivio, then checks the customer in Dynamics 365 Business Central and refuses to go on if the customer is unknown or blocked. It also looks for a sales order already created for that call and stops if there is one. You see the exact order, including a reference tied to the call, and nothing is created until you say yes. It creates one order, with no lines, and does not retry if it fails.

Business outcome

---

Phone orders reach Business Central once, for a valid customer, without retyping or duplicates.
See Full Use Case

scenario

-

After a call, the agent has to remember to create a follow-up task in Capsule CRM, find the right contact from a phone number, and pick the right owner. Tasks get forgotten, attached to the wrong person, or entered twice.

What popdock provides

--

Give a call and optionally a due date, defaulting to the next business day. It reads the Contivio call and its segments, then finds the Capsule CRM person whose phone number matches the other party, stopping and listing candidates unless exactly one matches. It matches the call's agent to a Capsule CRM user as the task owner, and leaves the owner unset and tells you if no single user fits. You see the task, detail, due date, contact and owner and nothing is saved until you say yes. It creates one task, then reads it back so you know it landed.

Business outcome

---

Follow-ups from calls land in Capsule CRM once, on the right contact, with the right owner and a read-back to prove it.
See Full Use Case

scenario

-

When an agent finishes a call, the details are retyped into Freshdesk: find the caller, write a subject, paste the summary and set a priority. The ticket arrives late or thin, and if two people log the same call you get a duplicate.

What popdock provides

--

Give a call and a priority, or it asks for one. It reads the call in Contivio and finds the caller in Freshdesk by phone number, stopping to ask for an email unless exactly one contact matches. It then checks for a ticket from the same day for that contact and asks whether to go on if it finds one. You see the proposed ticket, with a subject taken from the call summary and the call details in the description, and nothing is created until you say yes. It creates one ticket and reads it back to confirm.

Business outcome

---

Tickets from phone calls reach Freshdesk with the call details already in them, once, instead of late or retyped.
See Full Use Case

scenario

-

Sales reps promise follow-ups on calls, but turning each one into a HubSpot task means finding the call, working out which contact it was, and checking a task is not already open. Under time pressure the task is never created and the prospect hears nothing.

What popdock provides

--

Give a call and optionally a due date, defaulting to the next business day. It reads the call in Contivio, finds the HubSpot contact by matching the phone number against HubSpot's logged calls, and refuses to go on if it cannot find exactly one contact. It checks for an open HubSpot task that already covers the call and stops if there is one. It then shows a dry run of the task, with the call summary in the body, and writes to HubSpot only when you answer yes. It adds a single task and nothing else.

Business outcome

---

Follow-ups promised on calls become HubSpot tasks on the right contact, only once you have approved them.
See Full Use Case

scenario

-

Follow-ups after a call are remembered rather than scheduled, so contacts go cold. Adding a OnePageCRM action by hand means reading the call outcome, opening the contact, checking an action is not already booked and typing a date.

What popdock provides

--

Give a call, a OnePageCRM contact and a follow-up date. It reads the call in Contivio, then checks the contact in OnePageCRM and looks for an open action that already mentions this call or falls on that date, stopping if it finds one. You see the proposed action text, drafted only from the call summary and result, with the contact and due date, and nothing happens until you say yes. It then adds one action and reads the contact's actions back to confirm it exists. It never edits or deletes actions.

Business outcome

---

A dated follow-up action exists on the OnePageCRM contact after every call that needs one, without duplicates or invented detail.
See Full Use Case

scenario

-

A follow-up promised on a call has to be copied into Salesforce as a task. That means finding the caller's contact and related account, working out who should own it and typing the details, and tasks go missing or land on the wrong person.

What popdock provides

--

Give a call, the person the task is for and optionally a due date, three business days out by default. It reads the call in Contivio, finds the Salesforce user by name and the caller's contact by the call's customer id, and stops and lists them if either is ambiguous. You see the task with the subject, call summary, contact, related account, assignee and due date, and an identical open task is shown first if one exists. Nothing is created until you say yes. It then creates one task and reads the assignee's tasks to confirm. It never updates tasks.

Business outcome

---

Follow-ups from calls become Salesforce tasks for the right person and contact, once, and checked after creation.
See Full Use Case

scenario

-

When a call turns into an incident, the agent retypes the details into ServiceNow: caller, short description, long description, urgency. Context from the call is lost, and the same issue gets logged twice by different people.

What popdock provides

--

Give a call, the caller's email and optionally an urgency, 3 by default. It reads the call in Contivio, then finds the ServiceNow user by email and stops unless exactly one user matches. It looks for similar open incidents from that caller since the day before the call and asks whether to go on if one exists. You see the drafted incident, with a short description from the call summary and the call id, queue, agent and time in the description, and nothing is created until you say yes. It creates one incident and reports its number. It never updates incidents.

Business outcome

---

Phone calls become ServiceNow incidents with their context attached, for a confirmed caller and without duplicates.
See Full Use Case

scenario

-

When a phone call needs a ticket, the agent retypes it into Zendesk: find the requester, write a subject, paste the summary and set a priority. Typos creep in, and someone else may have already logged the same call.

What popdock provides

--

Give a call and optionally a priority, normal by default. It reads the call in Contivio, then searches Zendesk users for the caller's phone number and, if it finds the requester, looks for an open ticket from them created since the call date, stopping unless you say to create another. You see the proposed ticket, with a subject built from direction, queue and date and the call summary, agent, time and result as the comment, and nothing is created until you say yes. It makes one ticket without retrying and never changes Contivio.

Business outcome

---

Calls become Zendesk tickets with the call details in them, once, without retyping or a second ticket for the same issue.
See Full Use Case

scenario

-

A collector preparing to chase an overdue balance checks the ledger in Business Central, then the call history in the contact center, and pieces the two together by date. It is easy to miss whether anyone called after a reminder went out, or to total amounts across different currencies.

What popdock provides

--

Give a Business Central customer number and how many days to look back, 30 by default. It confirms the customer exists and notes the balance, amount due, credit limit and whether they are blocked. It then reads the customer's Contivio calls, says if the customer id there uses a different format, and reads their overdue posted invoices and reminders from Business Central. You get one timeline of calls and money events, plus counts, the overdue total, the highest reminder level and whether a call followed the latest reminder. It shows currency codes, never adds across currencies and is read-only.

Business outcome

---

A collector sees calls beside overdue invoices and reminders for a customer, and knows whether anyone called after the last reminder.
See Full Use Case

scenario

-

Before speaking to a donor, staff look up their giving in DonorPerfect and then search the contact center for their recent calls, copying details between screens. Calls are missed because the two systems hold different identifiers, and the context behind a gift or a complaint is lost.

What popdock provides

--

Give a donor id and how many days to look back, 30 by default. It confirms the donor exists in DonorPerfect and stops if not. It then reads their Contivio calls using the donor id, and if no calls match it says so plainly and notes that calls may exist under their phone number, without guessing a match. It adds the donor's logged contacts from the same period. You get the donor profile with giving totals, the calls newest first with their AI summaries, the logged contacts, and a sentence on whether the two tell the same story. It is read-only.

Business outcome

---

Staff see a donor's giving, calls and logged contacts together before they pick up the phone, with nothing changed.
See Full Use Case

scenario

-

When a call comes in, the agent has to look up the caller in the CRM to see their earlier phone calls and open cases. Doing it after the call starts is slow, the number may be formatted differently in each system, and open cases are easy to miss.

What popdock provides

--

Give a call and optionally how many days to look back, 30 by default. It reads the call in Contivio and takes the customer's number from the call, the caller for inbound and the called number for outbound. It then finds Dynamics 365 Sales phone calls for that number, retrying without punctuation or country code, and looks up that customer's cases in the period. It stops if more than one customer matches. You get the call, the CRM phone calls, open and recent cases, and a line on what the agent should know before calling back. It is read-only.

Business outcome

---

An agent knows the caller's earlier phone calls and open cases before the callback, without searching the CRM by hand.
See Full Use Case

scenario

-

People who ring the business but are not in the CRM go unnoticed, so new leads from the phone never reach it. Finding them means exporting recent calls, exporting the CRM's people and comparing phone numbers that are formatted differently in each system.

What popdock provides

--

Give a look-back in days, 7 by default, and optionally a queue. It reads the Contivio calls for the period, takes the customer's number from each, and groups the calls by number with counts and talk time. It reads the people in Attio and compares phone numbers on the last nine digits, ignoring spaces, dashes, brackets and prefixes. You get the numbers that match no Attio person, with call count, last call time, the agents who handled them and a one-line summary from the latest call, ordered by call count, plus how many numbers did match. It warns if the Attio list hits its limit and skips calls with no number. It is read-only.

Business outcome

---

Callers missing from Attio are listed with call counts and the latest summary, so no phone lead goes unnoticed.
See Full Use Case

scenario

-

Managers compare a call log with Capsule CRM notes by hand to see which calls were never written up. They match each call to a contact by phone number, open the contact and scan the history, and many calls slip through.

What popdock provides

--

Give an agent name and how many days to look back, 7 by default. It reads that agent's Contivio calls and ignores calls with no talk time. It matches each call to a Capsule CRM person by comparing the digits of the phone numbers, and checks the person's history for a note on or after the call. You get the calls with no note after them, with time, direction, contact, result and summary. Calls it could not match to a contact are listed separately as unmatched, never called missing, followed by the count of calls that did have notes. It never writes a note.

Business outcome

---

A manager sees which of an agent's calls were never noted in Capsule CRM, with unmatched calls kept apart so no one is blamed wrongly.
See Full Use Case

scenario

-

Managers compare the call log with Bloomerang interaction records to see which donor conversations were never recorded. It means matching each phone number to a constituent and then searching their interactions by date, and the gaps usually go unnoticed.

What popdock provides

--

Give an agent name, or leave it blank for all agents, and how many days to look back, 7 by default. It reads the Contivio calls and drops calls with no talk time. It finds the Bloomerang constituent for each number, listing numbers with no match or more than one match separately with the reason. For each matched constituent it checks for a phone interaction on the same date, treating a time zone difference as the same day and saying so. You get the unlogged calls with time, agent, constituent name, result and summary, plus counts of calls checked, logged, unlogged and unmatched. It is read-only and logs nothing.

Business outcome

---

Managers see which donor calls were never logged in Bloomerang, with unmatched numbers kept separate and nothing changed.
See Full Use Case

scenario

-

Calls with donors are not always recorded in the CRM, and comparing the two systems by hand is slow. Each call has to be matched against the donor's logged contacts, and time zones make dates look a day apart.

What popdock provides

--

Give a donor id and how many days to look back, 30 by default. It reads the donor's Contivio calls and then their logged contacts in DonorPerfect for the same period. A call counts as logged when a contact exists on the same calendar day, and a one day difference is allowed but marked as approximate because call times may be in UTC and contacts are plain dates. You get two lists, calls with no logged contact and calls with a match, with counts, and where a summary is missing it shows the result instead. It is read-only and logs nothing.

Business outcome

---

A donor's unlogged calls are listed, with approximate matches marked, so gaps in DonorPerfect are easy to spot.
See Full Use Case

scenario

-

Sales managers check whether customer calls made it into HubSpot by laying a phone call list next to the CRM activity feed and comparing times and numbers by eye. Numbers are formatted differently in each system and times drift by a few minutes, so unlogged calls slip through and no one follows up.

What popdock provides

--

Give a date range, and optionally an agent, and it reads the Contivio calls and the HubSpot calls for the same period. A Contivio call counts as logged when HubSpot has a call in the same direction, within 10 minutes, with a matching number on the last 9 digits. You get counts of calls, logged and not logged, then a table of the unlogged calls grouped by agent, busiest agent first. Calls with no talk time are ignored. Nothing is changed in either system, and it stops if either side returns nothing rather than flagging every call.

Business outcome

---

Managers see exactly which customer calls never reached HubSpot, by agent, without comparing two lists by hand.
See Full Use Case

scenario

-

Managers cannot easily tell which of an agent's calls were never recorded in Nutshell. Phone logs sit in one system, activities in another, and the two share no agent or phone field, so calls are checked by scrolling and guessing, and follow-ups go missing.

What popdock provides

--

Give an agent and a date range, and it reads that agent's answered or completed Contivio calls and the logged Nutshell activities for the same window. A call is treated as covered when a logged activity starts within 30 minutes and mentions the same contact or number. You get counts of calls, covered and uncovered, then a table of the uncovered calls with the AI summary of each. It says plainly that the match is approximate, asks for corrected dates if they are reversed, and changes nothing in either system.

Business outcome

---

Managers get a shortlist of an agent's calls with no logged Nutshell activity, with the approximate nature of the match stated up front.
See Full Use Case

scenario

-

Supervisors compare an agent's phone log with the calls recorded in OnePageCRM by hand. Numbers are written in different formats and times differ slightly, so unlogged calls are missed and the customer conversation is never recorded in the CRM.

What popdock provides

--

Give an agent and a date range, and it reads the agent's Contivio calls and the OnePageCRM calls for the same dates, narrowing by the agent's name there when they exist as a user. A call is logged when a OnePageCRM call has the same phone number on the last 9 digits within 30 minutes. You get counts of calls, logged and unlogged, then each unlogged call with time, direction, number, talk time and summary, plus CRM calls with no phone match. If the agent name is ambiguous it lists the choices and stops, and nothing is changed.

Business outcome

---

Supervisors get a list of an agent's unlogged calls, and the CRM calls with no phone match, without cross-checking two logs by hand.
See Full Use Case

scenario

-

Abandoned or unresolved calls rarely get a follow-up unless someone checks whether a ticket followed. Doing it means taking each caller's number, finding them in the help desk, and searching their tickets for the same day or later, call after call.

What popdock provides

--

Give a queue, optionally a call result and a date range, and it reads the Contivio calls, looks up each customer in Zendesk by phone number and then checks for a ticket from that requester on the day of the call or later. You get two lists: calls with a ticket, showing the ticket id, and calls with no ticket, split into customers known in Zendesk and customers not in Zendesk, with counts. Calls with a blank or internal number are listed separately, it covers at most 50 calls, and it only offers ticket creation as a next step, never creating one.

Business outcome

---

Calls that never produced a ticket are separated from covered ones, and unknown callers are called out, so follow-ups are not left to chance.
See Full Use Case

scenario

-

Managers scan lists of calls in a queue and then search Salesforce for each customer's cases, trying to see whether anyone logged the issue. It is slow work across two systems, and calls that never got a case slip through with no follow-up.

What popdock provides

--

Give a queue and a look-back period, and it reads the Contivio calls and keeps those with a customer id. For each distinct customer it checks Salesforce for a case created on the call day or the day after. You get a table of uncovered calls with call id, start time, agent, queue, result, customer id and the AI summary, plus totals for calls read, calls without a customer id, covered and uncovered. It checks at most 50 customers and says how many were left, notes when an id may not be a Salesforce account id, and never adds or updates anything.

Business outcome

---

Managers see which queue calls never produced a Salesforce case, with totals, so missed follow-ups can be fixed.
See Full Use Case

scenario

-

Account managers have no quick way to see which active customers have gone quiet on the phone. The customer list lives in Dynamics GP and the call history in Contivio, so checking means searching each customer's number against the call log one by one.

What popdock provides

--

Give an optional customer class and a look-back period, and it reads the active Dynamics GP customers, up to 50, with their phone number, balance and salesperson. It then reads the Contivio calls for the period and matches them to customers by phone digits. You get the customers with no calls, highest balance first, with the salesperson, then the count of customers that did have calls. Customers with no phone number are listed as cannot match by phone rather than no calls, it does not report everyone as uncontacted if Contivio returns nothing, and it changes nothing.

Business outcome

---

Account managers see which active customers have not been called, biggest balances first, without matching phone numbers by hand.
See Full Use Case

scenario

-

Supervisors cannot easily tell which of an agent's recent callers carry overdue balances. The calls are in the phone system and the invoices are in FreshBooks, so matching callers to clients by phone number and totalling what each owes is slow, and collections conversations are missed.

What popdock provides

--

Give an agent and a look-back period, and it reads that agent's recent Contivio calls, then matches each customer phone number to a FreshBooks client by business or mobile number. For each matched client it finds the open invoices. You get, per customer, the number of calls by the agent, the last call result, the open invoice count, the total outstanding and the oldest due date, sorted by amount owed. Ambiguous matches are listed separately and customers not found are shown as not in FreshBooks. It never changes, sends or deletes anything in FreshBooks and does not expose call recordings.

Business outcome

---

Supervisors see which of an agent's recent callers owe money, largest balance first, so collections talking points are not missed.
See Full Use Case

scenario

-

Long calls and open high-priority cases sit in different systems, so customers who are escalating are spotted by luck. Finding them means listing long calls, grouping them by customer and then searching Salesforce for each customer's open cases.

What popdock provides

--

Give a minimum talk time and a look-back period, and it reads the long Contivio calls and groups them by customer, counting calls with no customer id separately. For up to 40 customers it checks Salesforce for open high-priority cases. You get each matching customer with the number of long calls, the longest talk time, agent names, the AI summary of the longest call and the open cases with number, subject, status and owner. If the high priority filter returns nothing for everyone it retries once without it rather than guessing. It never adds or updates anything.

Business outcome

---

Support leads spot customers who are both on long calls and have open high-priority cases, before the escalation grows.
See Full Use Case

scenario

-

Open deals go quiet and nobody notices because call history lives in another system. To check, a rep or manager has to open each deal in Pipedrive, find the contact's phone number and look for recent calls in the phone system, one deal at a time.

What popdock provides

--

Give an optional deal owner and a look-back period, and it reads the open Pipedrive deals, up to 50, then looks up each deal's contact for a phone number. It reads the Contivio calls for the period and matches them to contacts by phone number. You get the deals with no calls, sorted by value, with stage, contact and the last call date if any, then a separate list of deals whose contact could not be resolved. It warns when the call results hit the record cap and says so rather than listing every deal if Contivio returns nothing. It changes nothing in either system.

Business outcome

---

Sales teams see which open deals have had no calls, biggest value first, so quiet deals are chased before they stall.
See Full Use Case

scenario

-

Collectors compare an overdue invoice report against call logs by hand. They total what each customer owes in the accounting system, then search the phone system customer by customer to see who has been called, so overdue customers are never chased.

What popdock provides

--

Give a minimum days overdue and a look-back period, and it reads the overdue Intacct invoices, adds up what each customer owes and keeps the ten largest. For each one it checks Contivio for calls in the period and notes the latest call, agent and result. You get one table, largest balance first, with overdue total, oldest due date, number of calls and last call details, split into customers with no calls in the window and customers who were called. It warns if no call carries a customer id rather than assuming nobody was called, and it changes nothing.

Business outcome

---

Collectors see which of the biggest overdue customers have not been called, so outreach goes where it is needed first.
See Full Use Case

scenario

-

ARR declines are reviewed in finance data with no view of what the customer said to the contact center. Finding the customers whose ARR fell means comparing two month snapshots row by row, then searching the call system for each one.

What popdock provides

--

Give two months, and it reads the Rillet ARR for both, matches customers by their customer id and keeps up to ten whose ARR fell, largest drop first. For each it reads the Contivio calls from the start of the first month to the end of the second, and counts them by result and queue. You get a table of ARR before, ARR after, the drop, calls in the period and the most common call result, with a plain note on which decliners had no calls and which had many. It does not claim a cause, matches by customer id only, stops if either system returns nothing, and changes nothing.

Business outcome

---

Leadership sees which customers lost ARR and what contact they had with the contact center, without assuming a cause.
See Full Use Case

scenario

-

Supervisors want to know whether a call became a ServiceNow ticket. They read the call, find the agent's name, then search incidents by hand and guess at times and assignees, with time zone differences adding to the confusion.

What popdock provides

--

Give a call id and optionally a time window, which defaults to 60 minutes, and it reads the Contivio call for its time, agent, queue, result and summary. It finds the agent in ServiceNow, listing the candidates and stopping to ask if more than one user matches, then looks for incidents assigned to that agent opened within the window after the call. You get the call details, each incident with its number, description, priority, state, caller and opened time, and a clear verdict: ticket found, several candidates or no ticket in the window. It states that a match by agent and time is not proof, flags likely time zone offsets, and changes nothing.

Business outcome

---

Supervisors learn whether a call produced a ServiceNow ticket, with a clear verdict and the caveat that the match is by agent and time.
See Full Use Case

scenario

-

Dropped calls and drawn-out calls are usually found by exporting the call log and sorting by duration. The very short calls that point to dropped connections or hang-ups, and the very long ones that point to hard problems, get missed, and nobody looks for the pattern across agents or queues.

What popdock provides

--

Give a date range, and optionally what counts as short and long, which default to under 30 seconds and over 20 minutes of talk time. It reads the Contivio calls below the short threshold and above the long one. You get two lists, each with call id, start time, agent, queue, direction, result, talk time and the AI summary, then a short paragraph on any common agent, queue or result in each list. It states which thresholds were used, says so if a list is empty instead of loosening them, and changes nothing.

Business outcome

---

Team leads see the shortest and longest calls in a period with the pattern behind them, without sorting an export by hand.
See Full Use Case

scenario

-

Calls that end unresolved get no follow-up ticket because nobody cross-checks the phone system against the help desk. Doing it means picking out the abandoned or voicemail calls, finding each caller in Freshdesk by phone number and then searching their tickets, one caller at a time.

What popdock provides

--

Give a queue and a start date, and it reads the inbound Contivio calls, keeps those whose result or disposition shows abandoned, unresolved, voicemail or callback needed, and lists which result values it treated as unresolved. For up to 25 callers it matches the phone number to a Freshdesk contact and checks for a ticket created on or after the call. You get a table with call, caller number, agent, result, whether a contact was found and the first ticket id, with calls with no ticket first and counts of each group. An unknown caller is reported as a finding. It creates no tickets and changes nothing.

Business outcome

---

Support teams see which unresolved calls never got a Freshdesk ticket, with unknown callers called out, so no caller is left waiting.
See Full Use Case

scenario

-

After a difficult call with a donor, someone is supposed to flag the donor in DonorPerfect so the next person to speak to them knows. It is done by hand, after reading the call history, and it is often forgotten or applied twice.

What popdock provides

--

Give a donor and a flag, and optionally a look-back period, which defaults to 14 days. It reads the donor's recent Contivio calls with time, agent, result and summary, then checks the donor and their current flags in DonorPerfect. If the flag is already set it says so and stops. Otherwise it shows the donor, the calls that justify the flag and the flag it will set, and waits for your explicit yes. Only then does it set that one flag, and it reads the flags again to confirm it is there. If you do not confirm, nothing is changed.

Business outcome

---

Donors are flagged once after a difficult call, only on your say so, with a check that the flag landed.
See Full Use Case

scenario

-

Missed or abandoned calls from contacts with live deals go unnoticed until the deal stalls. Spotting them means filtering the call log for bad outcomes, finding each caller in Capsule CRM by phone number and then checking whether they have an open opportunity.

What popdock provides

--

Give a look-back period and optionally a minimum deal value, and it reads the Contivio calls that ended abandoned, missed, voicemail or unresolved. It matches each call to a Capsule CRM contact by phone number and finds that contact's open opportunities at or above the value. You get a ranking by opportunity value with contact, opportunity, milestone, value, expected close date and the problem call. A contact with several open deals is listed once with all of them, and calls that match no contact are listed separately. It only recommends follow-up and creates no notes or tasks.

Business outcome

---

Sales teams see which valuable open deals have a contact whose call went unanswered or unresolved, so follow-up happens before the deal stalls.
See Full Use Case

scenario

-

Putting a customer on hold for overdue invoices is often done on a hunch. Nobody checks the call history first for a promise to pay, so a customer who has just agreed a payment date can be put on hold, or one who has gone silent is left alone.

What popdock provides

--

Give a customer, a minimum overdue amount, which defaults to 1000, and a reason. It checks the customer exists in Intacct, adds up the overdue invoices, and reads their last 60 days of Contivio calls, bringing up any promise to pay. You see the overdue total, oldest overdue invoice, call count and any promise, and if the total is under the threshold it stops. Otherwise it waits for your explicit yes. Only then does it place the hold with a single update and nothing else, skipping the step if the customer is already on hold, and reads the customer back to confirm the hold is set.

Business outcome

---

Customers are put on hold only after the overdue amount and call history have been reviewed and you have said yes, with the hold read back.
See Full Use Case

scenario

-

Agents match a call to a donor by hand using the phone number, email or name. Phone formats differ between systems and common names repeat, so it is easy to pick the wrong person, and the call is then discussed without the donor's giving history in front of anyone.

What popdock provides

--

Give a call and optionally the caller's email or last name, and it reads the Contivio call for its time, direction, agent, queue, result and summary. It looks for the DonorPerfect donor by email, then by last name, stopping at the first search that gives exactly one donor. If several donors match it lists them with city and mobile number, suggests the best candidate by comparing the phone number, and asks you to choose. It never picks silently and never invents a match. For the chosen donor it adds their recent gifts and tells you how the match was made. It only reads.

Business outcome

---

Agents get the right donor and recent giving context for a call, with the match method stated and no silent guesses.
See Full Use Case

scenario

-

An agent sees a phone number on a contact center call and has to search Attio by hand for the matching person, then open their company and deals. Numbers are stored with different spaces, brackets and country codes, so a real match is easy to miss and a wrong one easy to pick.

What popdock provides

--

Give a Contivio call and it reads the call, works out the customer number from the call direction, and compares it with the phone numbers on Attio people, ignoring spaces, dashes, brackets and a leading plus or 00 and matching on the last 9 digits. It then shows the person, their company and their deals with stage, value and owner. If several people match it lists them and stops, and if nobody matches it reports the caller as in Contivio but absent from Attio. It is read-only, nothing in Attio is changed, and it tells you how the match was made.

Business outcome

---

Agents know who is calling and what is open with them in seconds, without guessing at a match or touching the CRM.
See Full Use Case

scenario

-

An agent or supervisor copies a caller's number out of the contact center and searches the donor database by hand to see who it was. Mismatched formats, a missing country code or a number on the wrong account make the match easy to miss, and the call summary lives somewhere else.

What popdock provides

--

Give a Contivio call and it reads the call, takes the customer number from the call direction, and looks that number up in Bloomerang, retrying with digits only if the exact format finds nothing. It then reads the constituent and reports the call (time, direction, agent, result, duration, summary) with who the donor is: name, type, status, account number and engagement score. If the number matches more than one account it lists them rather than guessing, and if nothing matches it says the caller is not in Bloomerang. It is read-only and leaves out recording links.

Business outcome

---

Calls are tied to the right Bloomerang donor in one step, with no guessing between accounts and nothing changed in either system.
See Full Use Case

scenario

-

An agent sees a phone number on a call and has to search HubSpot by hand to find out who it is, then open that person's tickets and their company's deals. Formats differ between the two systems, and an unnoticed open ticket or deal means the next conversation starts cold.

What popdock provides

--

Give a Contivio call and it reads the call, takes the customer number from the call direction, and finds the HubSpot contact by matching calls logged around the same day on the last 9 digits of the number. It then reads the contact and shows their open tickets and the open deals on their company, and ends with one line on what the agent should know before the next contact. If several contacts share the number it lists them all, and if HubSpot does not know the number it says so and shows the call details. It is read-only and changes nothing in HubSpot.

Business outcome

---

Agents start the next contact knowing who the caller is and what is open with them, with nothing in HubSpot changed.
See Full Use Case

scenario

-

An agent or supervisor takes a number from a call in the contact center and searches Nutshell by hand to see who it was, which company they work for and what leads are open. The CRM has no phone search, so contacts get missed or the wrong one is picked.

What popdock provides

--

Give a Contivio call and it reads the call, takes the customer number from the call direction and matches it, digits only, against the phone numbers of Nutshell contacts. It then shows the matched contact with job title, owner and when they were last contacted, their company, and each lead with status, value and expected close date. If several contacts match it lists them all and says the match is ambiguous, and if none match it reports the number as present in Contivio and absent from Nutshell. It is read-only and never creates or changes anything in Nutshell.

Business outcome

---

Callers are matched to the right Nutshell contact, company and leads, with ambiguity and gaps reported instead of guessed.
See Full Use Case

scenario

-

A rep hears a number in the call log and searches OnePageCRM by hand for the contact. Numbers are stored in different formats and the contact list is long, so the right contact is often missed or the wrong one opened.

What popdock provides

--

Give a Contivio call, and optionally a last name to narrow the search, and it reads the call and takes the caller number from the call direction. It compares that number with the phone on each OnePageCRM contact, ignoring spaces, dashes, brackets and a leading plus or 00 and treating two numbers as the same when the last 9 digits agree. It then reports the call with the matching contact, their company, status, next action and total deals. If several contacts match it lists them all, and if none match it says the number is not in OnePageCRM. It is read-only and warns when the search may be incomplete.

Business outcome

---

Reps see which OnePageCRM contact rang, with their next action and deal count, and nothing is changed or guessed.
See Full Use Case

scenario

-

A sales lead that arrives on a call is easily lost because logging it in the ERP is a separate manual step. You have to find the contact, check whether an opportunity is already open for the company, and type the details in, so many leads are never recorded or are recorded twice.

What popdock provides

--

Give a contact name and a call, and optionally an estimated value. It reads the call, finds the contact in Dynamics 365 Business Central and shows any open opportunities for their company. You then see the exact opportunity it would create, with a short description taken from the call summary, and it warns if one is already open for that company. Nothing is created until you say yes, and then it creates one opportunity only and reports the result. It never creates a contact, never invents a value, and does not retry if creation fails.

Business outcome

---

Leads from calls become Business Central opportunities once, against a real contact, with no duplicates and no invented values.
See Full Use Case

scenario

-

After each call an agent retypes the outcome into Capsule CRM, which means finding the right person, writing up what was said and saving it as a note. When the day is busy the note is late, thin or never written, and the customer history has a gap.

What popdock provides

--

Give a Contivio call, and optionally a contact name, and it reads the call and finds the matching person in Capsule CRM by comparing phone digits, falling back to the name you gave. If it does not find exactly one person it lists the candidates and stops. You then see the exact note it would write, with the date, direction, agent, outcome and summary, and the contact it will go on, and nothing happens until you say yes. It adds one note only, skips the write if the same note already exists on the contact, says so plainly when the call has no summary, and then reads the new entry back so you know it landed.

Business outcome

---

Call outcomes reach the right Capsule CRM contact the same day as one confirmed note, with no duplicates and no retyping.
See Full Use Case

scenario

-

Agents retype call details into DonorPerfect after each call, picking an activity code and writing a comment from memory. Contacts end up late, inconsistent between agents, or saved twice, so the donor history cannot be trusted.

What popdock provides

--

Give a Contivio call and a DonorPerfect donor, and optionally an activity code. It reads the call, checks that the donor exists and that a contact with the same summary is not already logged on that date. If you did not give a code it lists the available activity codes and asks you to choose, and never picks one for you. You then see the exact contact it will create, with the donor name, date, agent, code and a comment built from the direction, result and call summary, and nothing is saved until you say yes. It saves one new contact without overwriting anything, then re-reads the donor's contacts and reports what was stored.

Business outcome

---

Donor calls are logged once, with a consistent activity code and comment, and checked after saving so nothing is lost or doubled.
See Full Use Case

scenario

-

After each call an agent opens the CRM and logs a phone call by hand, typing the subject, number, duration and a note from the call. It is easy to skip when the queue is busy, and easy to log the same call twice when two people handle the follow up.

What popdock provides

--

Give a Contivio call, and optionally a record to attach it to, and it reads the call and checks Dynamics 365 Sales for a phone call already logged for that number on that day. If one exists it reports it and stops. Otherwise you see the phone call it would create, with the subject, number, duration in whole minutes, whether it was outgoing, the call date and the short summary as the description. Nothing is created until you say yes, and then it creates one phone call and reports it, or says nothing was written. Contivio is never changed.

Business outcome

---

Calls reach Dynamics 365 Sales as one confirmed phone call each, with no duplicates and no retyping of the details.
See Full Use Case

scenario

-

Call outcomes are copied into Pipedrive by hand, if at all. The rep has to work out which person the call was with, write up the date, agent, result and summary, and make sure the same call was not noted already.

What popdock provides

--

Give a Contivio call, and optionally the person's email, and it reads the call and finds the Pipedrive person by matching the customer number against calls logged around that time, falling back to the email. If it cannot find a single person it stops and says so. You then see the person and the exact note, with the date, direction, agent, result, duration and summary, and nothing happens until you say yes. It checks that an identical note does not already exist, adds one note only, re-reads the person's notes to report the new note, and leaves recording links out. If the summary is missing it says so in the note.

Business outcome

---

Call outcomes land on the right Pipedrive person as one confirmed note, with no duplicates and no recording links shared.
See Full Use Case

scenario

-

Agents retype call details into Bloomerang after each call, finding the right constituent first and then writing the interaction. Many calls are never recorded, and some are recorded twice when a colleague also logs them.

What popdock provides

--

Give a Contivio call, and optionally a subject, and it reads the call and matches the caller's number to a Bloomerang constituent, stopping if there is no match or more than one. It checks that an interaction for that call is not already logged on that date. You then see the constituent and the exact Phone interaction it will create, with the date, subject, direction and a note built from the agent, result, talk time and AI summary, and nothing happens until you say yes. It adds one interaction only, reports its id, and leaves recording links out.

Business outcome

---

Donor calls become one confirmed Phone interaction on the right constituent, with no duplicates and no retyping.
See Full Use Case

scenario

-

A rep finishes a call and has to log it in HubSpot by hand: find the contact, set the direction, time and duration, and paste in what was said. It is forgotten on busy days, and a call logged twice distorts the contact timeline.

What popdock provides

--

Give a Contivio call and it reads the call, then looks for a HubSpot call already logged within the same window with the same direction, number and start time, and stops if one exists. It finds the contact from HubSpot calls on the same number, and if it cannot find one single contact it asks for an email. By default it is a dry run that shows exactly what would be created, with the contact, title, direction, time, duration and the AI summary as the body. Only when you say yes does it create one HubSpot call and report its id.

Business outcome

---

Calls are logged on the right HubSpot contact once, with the AI summary as the body and nothing written until you confirm.
See Full Use Case

scenario

-

Reps copy call details into Nutshell by hand after each call, working out the start and end times from the call and typing a name for the activity. It is often skipped, and when a colleague also logs the call it ends up in the timeline twice.

What popdock provides

--

Give a Contivio call, and optionally an activity type, and it reads the call and searches Nutshell for an activity already logged around the same time with that call id in its name, stopping if it finds one. You then see the proposed activity with its name, type, start time and end time worked out from the talk duration, and nothing happens until you say yes. Because Nutshell activities cannot be edited or removed afterwards, it tells you that when it asks. It then creates one activity only and reports the result, and if the call has no talk time it uses the start time for both and says so.

Business outcome

---

Calls are logged in Nutshell once, with the right times and a name that points back to the call, and only after an informed yes.
See Full Use Case

scenario

-

After a call a rep opens the contact in OnePageCRM and types in the call by hand: time, direction, duration, result and what was said. It is forgotten on busy days, and a call logged by two people shows up twice on the contact.

What popdock provides

--

Give a Contivio call and a OnePageCRM contact. It reads the call, checks the contact exists and looks for a call already logged on that contact within 30 minutes, stopping if there is one. You then see the call text it would log, with the direction, time, duration, result and summary, plus the contact name and phone number, and nothing happens until you say yes. It adds one call only, using values from Contivio and leaving the call result empty if no mapping is clear, then reads the contact's calls again to confirm it is there and reports its id.

Business outcome

---

Calls are logged on the right OnePageCRM contact once, built only from Contivio data and checked after saving.
See Full Use Case

scenario

-

When a customer phones about an open ServiceNow incident, the details of the call stay in the contact center system. Someone has to copy the time, agent, outcome and summary onto the incident by hand, so the ticket often lacks the conversation or has it pasted twice.

What popdock provides

--

Give a Contivio call and a ServiceNow incident number. It reads the call, finds the incident and warns you first if it is closed or resolved, asking before going on. It also mentions it if the call took place before the incident was opened. It drafts a work note with the call time, agent, direction, duration, result, summary and call id, and shows it with the incident number, and nothing is written until you confirm the text. It then adds that single work note and changes no other field. It never creates incidents, and if the incident already shows the call id it stops.

Business outcome

---

Call details reach the right ServiceNow incident as one confirmed work note, with no duplicates and no other field touched.
See Full Use Case

scenario

-

Poor satisfaction scores in Freshdesk are reviewed ticket by ticket, without knowing whether the same customer also phoned in several times. Finding out means looking up each customer, then searching call records for their number and comparing the results by hand.

What popdock provides

--

Give a rating threshold and a start date, and it reads the Freshdesk satisfaction ratings at or below that score since then. For each one, up to 20, it finds the customer and the ticket, then looks in Contivio for that customer's calls by matching phone or mobile digits. You get a table per rating with the ticket, subject, rating, feedback quoted exactly, agent, calls made, longest handle time and call results, and a short list of customers who both rated poorly and called more than once. Customers with no phone number are listed separately, and it says if it truncated. It is read-only.

Business outcome

---

Leaders see whether repeat calls explain poor satisfaction scores, with feedback quoted exactly and nothing changed in either system.
See Full Use Case

scenario

-

An agent or supervisor reviewing a call has only a phone number. To see who it was and whether they owe anything, they have to hunt through the accounting system for the client and then open their invoices, and similar numbers make it easy to pick the wrong client.

What popdock provides

--

Give a Contivio call and it reads the call, takes the customer number from the call direction and compares it with the business and mobile phone of each FreshBooks client, ignoring spaces, dashes, brackets and a leading country code. If more than one client matches it lists them all and stops, and if none match it reports the call as unmatched. For the matched client it shows the open invoices with due dates and outstanding amounts, plus the call details and the client's name, organization and email. It says which phone field matched and that phone matching is approximate, never changes FreshBooks and does not expose recordings.

Business outcome

---

Agents and supervisors see which client called and what they owe in one reply, with ambiguous matches listed and nothing changed.
See Full Use Case

scenario

-

An agent takes a call and then searches the help desk by hand to see who the caller is and what tickets they already have. Phone numbers are stored differently in each system, so the contact is missed or the wrong one is opened, and an open ticket goes unnoticed.

What popdock provides

--

Give a Contivio call, and optionally how many days of history to show (90 by default). It reads the call, takes the customer number from the call direction and compares it with the phone and mobile of Freshdesk contacts, digits only. If several contacts match it lists them and stops, and if none match it reports the caller as unknown to Freshdesk. For the matched contact it shows the call, the contact and a table of recent tickets with subject, status, priority and dates, flagging any still open. It also says which number format it used. It is read-only and changes nothing in Freshdesk.

Business outcome

---

Agents see who called and their recent tickets in one reply, with open issues flagged and nothing changed in Freshdesk.
See Full Use Case

scenario

-

A supervisor reviewing an agent's calls in Contivio sees phone numbers, not people. To learn which callers are known contacts they copy each number, search Pipedrive, and try the number in different formats. Callers who are not in the CRM at all are easy to overlook.

What popdock provides

--

Give an agent name and a date range and it reads that agent's Contivio calls, then works out the customer number on each one from the call direction. It looks for the same number in the Pipedrive call logs, strips spaces, dashes and country codes so formats do not get in the way, and pulls the matching Pipedrive person with their organization and open deals. Matching is by phone number only, never by name. If a number belongs to more than one person it lists them all instead of choosing. Nothing is changed in either system.

Business outcome

---

You see which callers are known Pipedrive people and which are not, with no guessing and nothing changed in either system.
See Full Use Case

scenario

-

When a call ends without a resolution, someone has to open a case in Dynamics 365 Sales. They retype the details from the call, find the right account, and hope nobody already opened a case for the same issue. Skip the search and you get duplicate cases for one customer.

What popdock provides

--

Give a Contivio call and optionally a priority, and it reads the call and stops if the result shows it was already resolved. It then finds the one matching Dynamics 365 Sales account for the customer and looks for a similar open case from the previous 14 days. If the account is not found exactly once, or a similar case is open, it stops and tells you. Otherwise it shows the case it would create, with a description built from the call summary, and nothing is saved until you say yes. Only one case is ever created, and recording links stay out of it.

Business outcome

---

Unresolved calls become one well described case on the right account, with no duplicates and nothing created without your yes.
See Full Use Case

scenario

-

After a customer call, an agent retypes the notes into a new Salesforce case: subject, description, account, priority. They rarely check whether a case for the same issue is already open, so the customer ends up with two. The call details copied across are often partial or wrong.

What popdock provides

--

Give a Contivio call, a Salesforce account and optionally a priority, and it reads the call with its AI summary, then checks that the account exists. It looks at the account's open cases and stops if one was created within two days of the call, so no duplicate is made. If not, it shows the subject, a description with the call id, time, agent and queue, the account and the priority, and waits for an explicit yes. Only then does it create one case, and it reads the account's cases again to confirm the case exists and report its number. Existing cases are never updated.

Business outcome

---

Each call that needs a case gets exactly one, with the right details and a confirmed case number, and open cases are never duplicated.
See Full Use Case

scenario

-

Collections work from the customer balances in Dynamics 365 Business Central, while the record of who was actually phoned sits in the contact center. To find overdue customers nobody has called, you export the balances and then look up each customer in the call log. The ones that were never contacted are easy to miss.

What popdock provides

--

Set a minimum balance, 1000 unless you say otherwise, and a look-back period, 14 days by default. It lists the Business Central customers owing at least that amount, capped at 25 and telling you if the cap is hit, then checks Contivio for each customer's calls in the period. Customers with no calls come first, biggest balance at the top, followed by the customers who were called with their call count and last result. If no customer returns any calls it stops with a note that the customer ids may use a different format. Nothing is changed in either system.

Business outcome

---

Collections see which overdue customers have had no call, largest balance first, with no changes made in either system.
See Full Use Case

scenario

-

Before ringing a customer, a rep opens Pipedrive to read the open activities and the latest notes, then opens the call system to see who spoke to them recently. The two never line up neatly, so the rep walks into the call without the full picture or spends time stitching it together.

What popdock provides

--

Give a person's email and optionally how many days to look back, 30 by default, and it finds that person in Pipedrive, stopping if there is no match or more than one. It summarizes their open activities, the last three notes and any deals named, then finds their Contivio calls, first by customer id and otherwise by matching the phone number. You get a briefing with who they are, open CRM work, recent notes and calls with agent, result and summary, ending with any mismatch it spotted. Phone numbers are masked to the last four digits, recording links are left out, and nothing is changed in either system.

Business outcome

---

Reps start every customer call knowing the open work, the latest notes and the recent calls, without opening two systems.
See Full Use Case

scenario

-

Account owners preparing renewals look at contract end dates in Rillet, but nothing there shows how recently the customer has actually been in touch. Checking means taking each expiring contract, finding the customer in the call system and counting calls by hand. A contract can expire with no call in months and nobody notices.

What popdock provides

--

Set how many days ahead to look, 90 by default, and it lists active Rillet contracts ending in that window, keeping the highest value ones if there are more than the limit of 10. It adds each customer's name, then counts their Contivio calls over the last 90 days with the latest call date and result. You get a table ordered by end date, and contracts ending within 30 days with no calls in 90 days are flagged as having no recent contact. Customers are matched by customer id only, never by name or phone. If either system returns nothing it stops, and nothing is changed.

Business outcome

---

Renewal owners see which expiring contracts have gone quiet and can act before the end date, with no changes made in either system.
See Full Use Case

scenario

-

To check that everyone taking calls in the contact center is a current employee, someone exports the agent names from the phone system and compares them with the employee list in NetSuite. Names are spelled differently and surnames repeat, so people get matched to the wrong employee or missed altogether.

What popdock provides

--

Give a start date and optionally a job title, and it builds the list of agents with Contivio calls since that date and how many calls each took. It reads the NetSuite employees, limited to the job title if you gave one, and matches each agent by last name, and by email when the agent name looks like one. A match is marked certain only when exactly one employee has that last name, otherwise it is ambiguous and never shown as certain. You get matched agents, agents with no employee match, and matched agents whose employee has a termination date on or before your start date. It says plainly that name matches are not authoritative, and changes nothing.

Business outcome

---

You see agents with no employee record and agents linked to terminated employees, with ambiguous name matches never passed off as certain.
See Full Use Case

scenario

-

Phone-system calls and CRM call logs are supposed to tell the same story, but they are recorded by different people and systems. Comparing them means exporting both, lining up numbers and times, and checking durations. Calls logged in only one place, or logged with a very different length, are easy to miss.

What popdock provides

--

Give a date range and optionally an agent name. It reads the Contivio calls for that range and the Pipedrive call logs for the same period, narrowing to one Pipedrive user when you name an agent and stopping to list the options if the name matches several users or none. It pairs a call with a log when the phone numbers agree after cleaning spaces, dashes and country codes and the start times are within 5 minutes, then compares durations and flags differences over 30 seconds. You get calls in Contivio only, calls in Pipedrive only and duration mismatches with counts and a one-line verdict. It warns when results may be truncated and changes nothing.

Business outcome

---

You see exactly which calls are missing from the CRM log or recorded with a different length, and nothing is changed in either system.
See Full Use Case

scenario

-

Calls handled in the contact center are supposed to appear as phone calls in the CRM, but logging depends on each agent remembering. Finding the gaps means exporting calls from the phone system and phone calls from Dynamics 365 Sales and eyeballing both for numbers and dates that line up.

What popdock provides

--

Give a queue, or leave it blank for all, and a date range. It reads the Contivio calls for that queue and period and the Dynamics 365 Sales phone calls for the same dates, up to 200 of each, and tells you if either list hits 200 and may be truncated. It matches a call to a CRM phone call when the customer phone number matches, after reducing both to digits, and the times are within a day. You get counts of calls, CRM phone calls, matched and unmatched, the unmatched Contivio calls grouped by agent, and any CRM phone calls with no Contivio call. It never logs the gaps it finds and changes nothing.

Business outcome

---

You see which handled calls never reached the CRM, grouped by agent, and nothing is logged or changed for you.
See Full Use Case

scenario

-

A customer agrees on a call to pay an invoice, and someone later keys the payment into Wave from memory or notes. It is easy to pick the wrong invoice or customer, enter more than the balance, or record the same payment twice.

What popdock provides

--

Give a Contivio call, an amount and a Wave invoice number. It reads the call and its summary and asks whether to continue if the summary does not mention a payment. It checks the Wave invoice and customer, compares the customer's phone numbers with the call and stops if the amount is more than the amount due or the balance is already zero. You then see the call, invoice, amount and date, and choose the payment method and account. Nothing is recorded until you say yes, and then it records one payment and reads the invoice again to report the new amount due and status. If the phone numbers do not match, you must confirm explicitly first.

Business outcome

---

Payments agreed on a call land once, on the right invoice, with the new balance confirmed and no overpayment or double entry.
See Full Use Case

scenario

-

A donor database only helps if the people ringing in are in it. Without a way to compare, nobody knows which repeat callers are unknown to Bloomerang, so new supporters are never added. Checking means exporting the inbound calls and searching each number in the database by hand.

What popdock provides

--

Choose how many days to look back, 14 by default, and optionally a queue. It reads the inbound Contivio calls for that window, groups them by phone number and counts the calls for each number. Each distinct number is then looked up in Bloomerang, matching on digits only, so spaces, dashes and country codes do not matter. You get a table of the numbers not in Bloomerang with call count, latest call time, most common result and the latest AI summary, highest count first, plus totals of callers, matched and unmatched. Withheld numbers are counted separately, truncation is flagged, no recording links are shown and no constituents are created.

Business outcome

---

You see which repeat callers are unknown to Bloomerang and how often they call, so new supporters can be added deliberately.
See Full Use Case

scenario

-

Before calling a donor back, staff look up the constituent in Bloomerang, find their phone numbers, and then search the phone system for calls to or from those numbers. Piecing the history together by hand takes time, and calls recorded under a different number are easily missed.

What popdock provides

--

Give a constituent's name and optionally how many days to look back, 30 by default. It finds the constituent in Bloomerang and, if several match, lists them with account number and city and asks which one you mean. It reads their phone numbers, then finds the Contivio calls to or from any of them, comparing digits only, and also looks for calls recorded under their account number, marking those as matched by customer id. You get the profile with type, status and engagement score, then a call table with agent, queue, result, talk time and AI summary, plus totals. It flags truncated results and calls whose customer id points elsewhere. Nothing is changed and no recording links are shown.

Business outcome

---

Staff go into a donor call with the profile and the full call history already in front of them, with nothing changed in either system.
See Full Use Case

scenario

-

A supervisor who wants to review an agent's calls scrolls through a long call list and opens calls one at a time looking for trouble. In a busy week the short calls, the unresolved calls and the complaints sit buried among routine ones, and many are never looked at.

What popdock provides

--

Give an agent name and a date range, and it pulls that agent's Contivio calls for the period. If the calls come from more than one agent name it lists them and asks which one you mean. It flags calls with very little talk time compared with the time spent handling them, calls whose result or disposition suggests no resolution, and calls whose AI summary mentions a complaint, repeat contact or transfer. You get a short table of the flagged calls with one line of summary each, plus calls reviewed, calls flagged and average talk time. Every flag comes from a returned field, never a guess, and nothing is changed.

Business outcome

---

Supervisors spend their review time on the calls that matter, with every flag traceable to the call data.
See Full Use Case

scenario

-

Managers want to know whether an agent's calls are going to customers who actually owe money, but the call list is in one system and balances are in another. Linking them means taking each phone number, finding the customer in Wave and checking what they owe, which is rarely done.

What popdock provides

--

Give an agent name and optionally a look-back period, 7 days by default. It reads that agent's Contivio calls, stopping to list the names if the calls come from more than one agent, and picks out the customer number on each call from its direction. It reads the Wave customers with an overdue balance and matches each number to a customer's phone or mobile, comparing digits only because the two systems share no customer id. You get a table of matched calls with customer name, overdue and outstanding amounts, result and talk time, then counts of calls to customers with no overdue balance and of unmatched numbers. If a number fits several customers it lists them. Nothing is changed.

Business outcome

---

Managers see how much of an agent's calling went to customers with overdue balances, with unmatched numbers shown rather than dropped.
See Full Use Case

scenario

-

When a customer calls again, the agent has to piece together what happened before from separate call records. Reading each summary takes time, and repeat contacts about the same unresolved issue are easy to miss until the customer is already frustrated.

What popdock provides

--

Give a customer id and optionally a start date. It reads all of that customer's Contivio calls from that date, or everything available, and puts them in time order. It counts the calls by channel, direction and result, then reads each AI summary and groups the calls by topic, noting repeat contacts about the same issue and whether the latest call resolved it. You get a short timeline, the main topics, how many times the customer had to call back, and the current state in one sentence. It only reports what the summaries support, does not repeat phone numbers unless you ask, stops if the id matches nothing, and changes nothing.

Business outcome

---

Agents see a customer's contact history as a short story with the open issue clear, before they answer the next call.
See Full Use Case

scenario

-

To see whether a customer's calls led to cases, you look at the calls in the contact center and then at the account and cases in Dynamics 365 Sales, matching them by hand. Calls where the issue was not resolved and no case was opened slip through, and nobody follows them up.

What popdock provides

--

Give a customer id and optionally a start date, 30 days back by default. It reads the customer's Contivio calls with time, queue, agent, result and AI summary. It then looks for the single Dynamics 365 Sales account with that account number and reads the cases created since the start date. If no account matches, it reports that the customer is in Contivio and absent from the CRM instead of guessing. You get a call table, a case table with case number, title, priority, status and created date, and the calls with no case created within a day whose result suggests the issue was unresolved. Nothing is created or changed.

Business outcome

---

Support teams see which unresolved calls never became a case, so follow up goes where the gap is.
See Full Use Case

scenario

-

To prepare for a conversation about an account, staff check the customer's balance and open receivables in Dynamics GP, and then separately hunt for recent calls in the contact center. They often find only one side, so they ring a customer who has just been called or miss that an overdue account has had no contact.

What popdock provides

--

Give a customer id and optionally a look-back period, 30 days by default. It reads the Dynamics GP customer, stopping if they do not exist, and keeps the name, balance, credit limit, hold status and main phone number. It lists the receivables transactions in the window with document number, type, dates and amounts, then reads the Contivio calls for that customer id. If none are found it falls back to matching calls by phone number on digits only and says which method found them. You get the account position, the receivables table, the calls table and 2 or 3 sentences on whether contact has followed the account position. Nothing is written to Dynamics GP.

Business outcome

---

Staff see balance, receivables and recent calls together, so they know whether an account has been contacted before they act.
See Full Use Case

scenario

-

A support rep who wants to know what a customer has called about checks the phone platform for calls, then HubSpot for logged calls and tickets, and tries to line the two up. Calls not logged in HubSpot, and tickets that never mention the call, are easy to miss.

What popdock provides

--

Give a contact's email and optionally how many days to look back, 30 by default. It finds the contact in HubSpot, and stops if none or several match, listing the candidates. It then finds their Contivio calls by comparing the last 9 digits of the phone number, which copes with country codes and leading zeros, and reads their HubSpot calls and tickets. You get three tables: Contivio calls with AI summaries, HubSpot calls and tickets. Each Contivio call is marked as logged in HubSpot or not, using the same direction and a start within 10 minutes, and a two sentence reading of what the customer has been calling about closes the report. Nothing is written to HubSpot.

Business outcome

---

Reps see one history of calls and tickets, including calls HubSpot never recorded, with nothing changed in either system.
See Full Use Case

scenario

-

A rep opens Nutshell to find a contact, copies their phone number, then searches the Contivio call log for the same number, which is usually formatted differently. The newest call is then compared with the last contacted date by eye, and that date is often out of date.

What popdock provides

--

Give a contact name and how many days to look back, and it finds the matching Nutshell contact, stopping with a list if several people match. It then pulls the Contivio calls for each of their phone numbers, comparing digits only so formatting differences do not hide a call. You get a table of calls with agent, queue, result, talk time and AI summary, plus totals and the last call date next to the Nutshell last contacted date. It is read-only, so nothing in Nutshell is changed, and a contact with no phone number is reported rather than guessed at.

Business outcome

---

Reps see every call with a contact in one view and know at once when Nutshell last contacted is behind, with no records changed.
See Full Use Case

scenario

-

To find out what was said to a billing customer, an agent searches the call log by hand and guesses which phone numbers belong to which Wave customer. The two systems share no customer id, so the phone number is the only link and it is easy to match the wrong calls.

What popdock provides

--

Give a customer name and a look-back period, and it finds the Wave customer, stopping with a list of names and phone numbers if more than one matches. It matches the customer's phone and mobile numbers to Contivio calls, comparing digits only, and lists each call with direction, queue, agent, result, talk time and AI summary. You also see the customer's balance and overdue amount, the call count and the date of the last contact. Numbers with no match are reported as unmatched, and nothing in Wave or Contivio is changed.

Business outcome

---

Agents see a customer's recent calls and balance together, with unmatched numbers shown and never guessed, so the next conversation starts informed.
See Full Use Case

scenario

-

A rep finds a contact in Attio, copies the phone number, then searches the call log for it by hand. The last interaction date in the CRM is rarely updated from phone calls, so it drifts behind what really happened.

What popdock provides

--

Give a contact name or email and a look-back period, and it finds the person in Attio, listing the candidates with their company if more than one matches. It then finds the Contivio calls that match their phone numbers on the last 9 digits and lists each with direction, agent, result, talk time and AI summary, plus total calls, total talk time and the last call date. It flags when the Attio last interaction is older than the latest call. It only reads, and a contact with no phone number is reported rather than guessed at.

Business outcome

---

Reps see a contact's full call history in one answer and know when Attio last interaction is out of date, without touching the CRM.
See Full Use Case

scenario

-

Leaders want to know whether their biggest donors have reached the contact center and whether those calls were handled. That means exporting top donors from DonorPerfect and then searching call records donor by donor, so unhandled calls from major givers go unnoticed.

What popdock provides

--

Give a minimum lifetime giving amount and a look-back period, and it lists DonorPerfect donors at or above that amount, up to 50. For each donor it checks Contivio for calls in the period and reports the donor, lifetime giving, number of calls, results such as abandoned or handled, and the AI summary of the latest call. It counts the major donors with no calls and calls out any whose calls were not handled. It only reads, and notes that calls with no customer id can hide a donor's contact.

Business outcome

---

Leaders see which major donors called and which calls went unhandled, so no top giver is left waiting for a follow up.
See Full Use Case

scenario

-

Low satisfaction scores get reviewed from the Zendesk comment alone, without seeing the phone calls that came before. Finding those calls means taking each assigned agent and searching the call system for the days before the rating, which is slow enough that it rarely happens.

What popdock provides

--

Choose a rating score, defaulting to bad, and a start date, and it finds the matching Zendesk satisfaction ratings with their ticket, agent and comment, up to 25. For each assigned agent it looks in Contivio for the calls they handled in the two days before each rating and lists time, queue, result, talk time and disposition. If an agent name finds nothing it retries with a partial name and notes the mismatch. It closes with recurring agents, queues and results, and short or abandoned calls. Calls are shown as possibly related, never proven, and nothing is changed.

Business outcome

---

Support leads see the calls behind each low rating and spot recurring agents, queues and outcomes, without presenting a guess as fact.
See Full Use Case

scenario

-

A support or collections agent takes a call, then switches between the phone system and the accounting system to see how often the customer has called and what they owe. The two are rarely lined up, so the agent misses that a past due balance and a run of calls are connected.

What popdock provides

--

Give a customer id and a look-back period, and it checks the customer in Intacct, stopping if the id does not exist. It reports name, status, total due and credit limit, then lists the customer's Contivio calls with direction, agent, result, talk time and a one line summary. It adds the open invoices, oldest due date first, marking those past due, and ends with a few plain observations from the data. It only reads, reports what the systems returned, and points out if the customer id or name differs between them.

Business outcome

---

Agents see calls and account standing together, so a past due balance and the conversations around it are visible before they reply.
See Full Use Case

scenario

-

To see what a client has said on calls and what they owe, someone opens the call system and the accounting system separately. Nobody lines the two up, so a client chasing an answer about an invoice is handled without anyone seeing both sides.

What popdock provides

--

Give a client id and a look-back period, and it finds the FreshBooks client, stopping if the client is not found. It pulls the client's Contivio calls and lists direction, agent, result, talk time and AI summary, then their open invoices with due date, outstanding amount and payment status, and the latest payment. It ends with a line on whether call activity lines up with any overdue balance. It only reads, never calls any FreshBooks add, update, delete or send action, does not expose recordings, and says plainly which side is empty or if the id format differs.

Business outcome

---

Support sees a client's calls, open invoices and latest payment in one view, with nothing changed and empty sides stated plainly.
See Full Use Case

scenario

-

A collector checks the customer's balance and open receivables in NetSuite on one screen and the call history in another, and often misses that the customer was already called. The customer ids may not match across systems, which makes the call search slower still.

What popdock provides

--

Give a customer email or name and a look-back period, and it finds the NetSuite customer, stopping if none or several match and listing the candidates. It reports the balance and the open receivables with outstanding amount and due date, oldest first, then looks for the customer's Contivio calls and lists direction, result, queue, agent and talk time. It ends with the call count and whether any call came after the oldest overdue date. It only reads, shares only what the report needs, and says when the customer id join between the two systems is unconfirmed.

Business outcome

---

Collectors see the balance, open receivables and prior calls together, so a customer who was already contacted is not chased blind.
See Full Use Case

scenario

-

A contact's history lives partly in the phone logs and partly in the CRM as calls, notes and actions. Reps piece the picture together by hand, and calls that were never logged in the CRM stay invisible.

What popdock provides

--

Give a last name, optionally a company, and a look-back period, and it finds the OnePageCRM contact, stopping with a list if several match. It reads the contact's logged calls, notes and actions, then finds Contivio calls that match their phone number on the last 9 digits. You get one timeline, oldest first, with each line marked CRM or Contivio, plus the Contivio calls that have no CRM call logged the same day and any open actions that are overdue. It only reads, and a contact with no phone number is reported rather than guessed at.

Business outcome

---

Reps get one timeline of every touch with a contact and see which calls never reached the CRM, without changing a record.
See Full Use Case

scenario

-

A ticket handler picks up a HubSpot ticket without knowing what the customer already said on the phone, so they re-ask questions. Finding the calls means looking up the contact's number and searching the call log around the ticket date.

What popdock provides

--

Give a ticket id and a look-back period, and it reads the HubSpot ticket and the contact's phone number, stopping if the ticket or the number is missing. It finds the Contivio calls that match that number on the last 9 digits in the window before the ticket was created, and lists them oldest first with their AI summaries. It then compares them with the ticket description and status, noting anything discussed on a call that the ticket does not mention and any later call that ended unresolved. It only reads, and says a summary is unavailable rather than inventing one.

Business outcome

---

Handlers see what was said on the phone before they reply, so customers are not asked to repeat themselves.
See Full Use Case

scenario

-

To know what a customer owes and who has spoken to them, a support agent flips between the finance system and the call system. They tend to see one side only, and the invoices, credit memos and calls never end up in a single timeline.

What popdock provides

--

Give a customer id and a look-back period, and it confirms the customer in Rillet, stopping if the id does not match. It collects invoices, credit memos and payments for the window, then the customer's Contivio calls matched by customer id only. You get the customer name and terms, invoice count, total billed, amount due and overdue count, credit memo totals, call count with inbound versus outbound and the most common result, then a short merged timeline. It only reads, never guesses a match from names or numbers, and stops if either system returns nothing.

Business outcome

---

Agents see billing and calls for one customer in a single timeline, built only from matched records and with nothing changed.
See Full Use Case

scenario

-

Managers build queue reports by exporting calls and totalling them by hand: volumes, talk times and outcomes for a period. The numbers drift between reports, and a truncated export can go unnoticed.

What popdock provides

--

Name a queue and a date range, and it pulls that queue's calls from Contivio, saying so up front if the result looks truncated. It totals calls by direction and result, gives average and longest talk and handle times, the share of calls per channel, and the five longest calls with a line from each AI summary. You get a short headline, compact tables for each split and any pattern a manager should see. It only reads, never changes data, and avoids repeating customer details beyond what the question needs.

Business outcome

---

Managers get a consistent queue summary for any period in one request, with the date range and any truncation stated up front.
See Full Use Case

scenario

-

To understand what happened on a call, someone opens the call record, then its segments, then each agent's activity log, and pieces the timeline together. It is slow enough that long or disputed calls are rarely traced.

What popdock provides

--

Give a call id, and it finds the call in Contivio, trying the session id too, and stopping if it cannot be found. It orders the call's segments with the queue, agent, talk time, contact time and result of each, then checks each agent's activity during the call for breaks or status changes. You get a timeline with one line per segment, the AI summary and a one sentence conclusion on where time was spent or lost. It only reads, does not infer anything the data does not contain, and reports the call alone if there are no segments.

Business outcome

---

Support leads see exactly how a call moved between queues and agents and where the time went, without opening three screens.
See Full Use Case

scenario

-

An agent with a call in front of them has to work out which Zendesk tickets belong to the caller. That means reading the call, finding the customer in Zendesk by phone number or email, and scanning tickets around the call date, and it is easy to miss or mismatch one.

What popdock provides

--

Give a call id, optionally a customer email and a number of days either side of the call, and it reads the call in Contivio. It finds the customer in Zendesk, by the email if you gave one or otherwise by matching the call's customer number to user phone numbers on digits only, and stops if there is no match or several. It lists their tickets around the call time with subject, status, priority, assignee and created date, and says whether a ticket was created the same day and whether the assignee matches the call agent. It only reads and never writes to Zendesk.

Business outcome

---

Agents see which tickets relate to a call, with ambiguous or missing customers reported instead of guessed, and nothing in Zendesk changed.
See Full Use Case

scenario

-

Piecing together what happened with a customer across calls, invoices and payments means several exports and a spreadsheet. Dates have to be merged by hand, and it is easy to lose which event came first.

What popdock provides

--

Give a customer id and a start and end date, and it pulls the customer's Contivio calls and, where needed, their call segments, then their Intacct invoices and payments for the same dates. It merges everything into one list sorted by date, each row marked Contivio or Intacct with the event type and key facts: agent, result and summary for calls, number, amount and due date for invoices, amount and method for payments. It closes with a short note on any pattern. It only reads, describes the sequence without claiming cause, names whichever source is empty, and lists rows without a date at the end.

Business outcome

---

Support and finance see calls, invoices and payments in date order in one answer, with the sequence described and cause never claimed.
See Full Use Case

scenario

-

Explaining why a credit memo was issued means finding the invoice it relates to, then searching call records by hand for that customer around the same time. Without the calls the reason behind the credit is often a guess.

What popdock provides

--

Give a credit memo number and a window in days, default 14, and it finds the credit memo in Rillet, stopping with a list if several match. It looks up the original invoice, carrying on if the invoice is not found, then finds the customer's Contivio calls in the window before the credit memo date, matched by customer id only. You get the credit memo, the invoice, and each call in date order with its AI summary, plus whether any call falls in the window. It never states that a call caused the credit memo, only reads, and stops if either system returns nothing.

Business outcome

---

Finance sees the invoice and the customer's calls leading up to a credit memo, with timing reported and causation never claimed.
See Full Use Case

scenario

-

Lining up a customer's support cases with what was said on calls means searching two systems and sorting by date manually. Cases with no call, and calls that never became a case, go unnoticed.

What popdock provides

--

Give a customer email and a start date, and it finds the NetSuite customer, stopping if none or several match. It pulls their cases from that date and their Contivio calls, and checks the segments of long calls to see which agents and queues handled them. You get one timeline, oldest first, marking each line as a case or a call with date, title or summary, result and agent, then any case with no call within 2 days either side and any call with no case. It only reads, never creates or updates a case, and says when the customer id join between the systems is unconfirmed.

Business outcome

---

Support leads see which cases had no call and which calls never became a case, with unconfirmed joins stated and nothing changed.
See Full Use Case

scenario

-

Callers quote invoice numbers on the phone, and the numbers are rarely checked against the accounting system. Wrong or already paid invoices then cause repeat calls, and reading every call summary to find them is slow.

What popdock provides

--

Name a queue and a date range, and it reads the AI summaries of that queue's Contivio calls and picks out only clear invoice references. It checks each distinct invoice number in Intacct and returns the customer, amount, amount due, due date and state. You get a table of call, date, agent, invoice number, found or not, and the Intacct details, with flags for invoices not found, invoices whose customer id differs from the call's, and invoices already fully paid. If an invoice number matches several Intacct records it lists them all. It only reads and does not guess from other digits.

Business outcome

---

Operations catch wrong, missing or already paid invoice numbers quoted on calls, before they cause another call.
See Full Use Case
No items found.

ready, go

Tools for Contivio

Start with ready-made MCP tools for the Contivio. Each one gives your AI client a single, clearly defined job: get invoices or journal entries, pull a file, or create and update records. Add a tool to your PopdockAI MCP server, choose the fields it returns and who can use it, and it's ready in Claude, ChatGPT or Microsoft Copilot. Nothing is exposed that you haven't switched on.

Tool Types

Name of tool
Description
get-data
contivio-get-activity
Returns agent activity records from the Contivio connector, by type, channel and contact center, for a date window or agent.
get-data
contivio-get-call-segment
Returns the segments of Contivio calls (queue, agent and handling steps), filterable by call, for tracing a call end to end.
get-data
contivio-get-call
Returns Contivio call records with durations, results, direction, queue, agent and AI call summaries, filterable by date, agent, queue and customer.

Ready to unlock your data?

‍

Start building tools that turn your business systems into AI superpowers

Join forward-thinking companies that are transforming their operations with intelligent, secure AI automation.

Try PopdockAI Free
See Documentation