Connectors

/

Procore

/

Create Procore site instruction
Write

Log Procore site instructions once, with the right type

For project managers and site leads who want a site instruction created in Procore by asking their AI assistant.

Try PopdockAI free
Get a live demo
Create Procore site instruction
Create a site instruction titled Relocate temporary fencing at gate 3 on Riverside Tower, type Site Directive, status Draft.
Riverside Tower has no instruction with that title, and Site Directive is a single match. - Title: Relocate temporary fencing at gate 3 - Type: Site Directive - Status: Draft - Cost and schedule impact: left blank Shall I create it?
Procore
Sample figures. Your results come from your own account.
procore-get-viewer-documents-accessible-tools
procore-get-instruction-types
procore-get-instructions
procore-create-instructions-on-a-project

On this page

The problem

The problem

The prompt

Who it's for

How it works

Tools used

Connector

Procore

Procore
Run it on your own Procore data.

Connect Procore, pick your AI tool and paste the prompt.

Try PopdockAI free

The problem

Site instructions get the wrong type or a twin

A site instruction needs the right type, a status the project uses and a title not already logged. Miss one and the instruction is filed wrongly or duplicated, and the people who should act on it never see it.

Without PopdockAI

  • Open the project and check existing instructions
  • Pick the instruction type from the list
  • Choose a status and hope it is valid
  • Notice later that the title was already logged

With PopdockAI

  • The instruction type is matched to the project's own types
  • The same title is checked first
  • A missing status is asked for, never guessed
  • The record is read back with its number

The prompt

Use this prompt

Copy it into any AI tool connected to PopdockAI. Swap the values in braces for your own.

Prompt
**Objective:** Create an instruction titled {title} of type {instruction-type} in {project-name} with status {status}.

**Step 1: Resolve the project**

Call `procore-get-viewer-documents-accessible-tools` with `project-name` equal to {project-name} to resolve the project id. If nothing matches, retry with `project-name.contains`. If more than one project matches, list them with their ids and stop and ask which one. If the user named a Procore company, pass it in the `company` parameter on every call.

**Step 2: Resolve the type and look for duplicates**

Call `procore-get-instruction-types` with the `project-id` and match {instruction-type}. Call `procore-get-instructions` with the `project-id` and look for the same title. The status is required and must be one the project uses; if {status} is blank, ask rather than guessing.

**Step 3: Confirm and create**

Show the user the exact values you will send, the project, and anything you could not resolve, and ask for an explicit yes. Do not call the write tool until the user confirms in this conversation. Then call `procore-create-instructions-on-a-project` with the `project-id`, `title`, `status` and `instruction-type-id`.

**Step 4: Verify**

Call `procore-get-instructions` with the `project-id` and confirm the instruction exists.

**Step 5: Report**

Report the instruction number, title, type and status, or the exact error.

**Rules & Guidelines:**

* The only write tool you may call is `procore-create-instructions-on-a-project`, and only once, after the user confirms. Do not call any other create, update, delete, send or bulk tool.
* Never invent an id, name or date. If a required value is missing or a lookup is ambiguous, ask.
* If the write fails, report the exact error and stop. Do not retry with changed values.
* Leave cost and schedule impact blank unless the user gave them.

**Validation:**

* If the project cannot be resolved, stop and say so. Do not read records from an unresolved project.
* If the main read returns nothing, say the project has none and stop. Do not fill the gap with assumptions.
* If {instruction-type} matches no type or several, list the types and stop.

Who it's for

One answer, three teams that use it

Project managers

Issue instructions without the form

Log an instruction from a site conversation with the right type and status, ready to be seen by the people involved.

Create an instruction called Hold concrete pour Level 5 pending inspection on Fabrikam Depot, type Hold Notice, status Open.

Site agents

Keep directives on record

Get a verbal direction recorded as a site instruction the same day, without trawling the existing list for repeats.

Log a site instruction Clear scaffold from east elevation on Contoso Warehouse, type Site Directive, status Draft.

Contract administrators

Protect the audit trail

Every instruction has a real type and status and is checked against existing titles, so the register is trustworthy at claim time.

Add an instruction titled Revised door hardware schedule on Northwind Plaza, type Design Change, and ask me for the status.

How it works

What PopdockAI does when you ask

You give the title, type and status in plain words. Your AI assistant checks the project and creates one instruction only after you have seen it and said yes.

Ask

You give the title, the instruction type, the project and the status.

Your AI tool

Check

It matches the type, looks for the same title and asks if the status is missing.

procore-get-viewer-documents-accessible-tools
procore-get-instruction-types
procore-get-instructions

Confirm

You see the exact values and say yes.

No items found.

Create

It creates the instruction once and reads it back with its number, type and status.

Your AI tool

What PopdockAI provides

The tools behind the answer

Ready made tools for Procore and one secure connection to your AI tool. No code, no exports.

get-data

procore-get-viewer-documents-accessible-tools

Returns Procore viewer documents accessible tools records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
get-data

procore-get-instruction-types

Returns Procore instruction types records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
get-data

procore-get-instructions

Returns Procore instructions records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
run-action

procore-create-instructions-on-a-project

Create instructions on a project in Procore, under instructions on a project (POST). This is a write tool: it is built Inactive and has not been run end to end through MCP, so test it in a Procore sandbox before switching it on.
Read only.Nothing in Procore Changes

This report is built from Get data tools only. PopdockAI applies the row, field and parameter rules your admin sets, and every query is written to the audit trail.

How Popdock AI secures your data

The outcome

One correct instruction, on the record

Try PopdockAI free
Get a live demo

Related use cases

More ways to put this data to work

One prompt template with infinite possibilities.

‍

Your AI assistant adapts its approach, tone, and capabilities to match each unique context while you maintain a single, manageable workflow.

Join forward-thinking companies that are transforming their operations with intelligent, secure AI automation.

Try PopdockAI Free
See Documentation