/
/
Register new Procore equipment with the right category
For fleet and yard teams who want a new machine added to the register without hunting for category and status ids, just by asking.
On this page
Connector
Connect Procore, pick your AI tool and paste the prompt.
The problem
New machines go in with the wrong category or a duplicate number
Adding a machine means finding the right category, type and status in the register's lists. A duplicate identification number or the wrong category creeps in, and the unit then shows up in the wrong reports.
Without PopdockAI
- Search the register to see if the number is already used
- Look up the category and type
- Find the status and decide owned or rented
- Fix the wrong category after the unit is reported on
With PopdockAI
- The identification number is checked first and a duplicate stops the job
- Category, type and status come from the register's own lists
- Ownership and status are asked for, never guessed
- You confirm the record first, then one unit is created and read back
The prompt
Use this prompt
Copy it into any AI tool connected to PopdockAI. Swap the values in braces for your own.
**Objective:** Register a new piece of equipment named {name} with identification number {identification-number}, category {category-name} and type {type-name}, after confirming with the user.
**Step 1: Check it is new**
Call `procore-get-equipment-register` with `identification-number` equal to {identification-number}. If a unit already has it, show it and stop.
**Step 2: Resolve the category and type**
Call `procore-get-equipment-register-types` with `name` equal to {type-name} and `category-name` equal to {category-name}. Note the type `id` and `category-id`. If more than one type matches or none, list the options and stop.
**Step 3: Resolve the status**
Call `procore-get-equipment-register-statuses` and ask the user which status to start the unit in (and whether it is owned or rented) if they have not said. Note the status `id`. Optionally call `procore-get-equipment-register-makes` and `procore-get-equipment-register-models` if the user names a make or model.
**Step 4: Confirm**
Show the user the exact values you will send and anything you could not resolve, and ask for an explicit yes. Do not call the write tool until the user confirms in this conversation. State the name, identification number, category, type, status, ownership and any make, model, vendor and rental dates.
**Step 5: Write**
After the user says yes, call `procore-create-equipment` with `name`, `identification-number`, `status-id`, `category-id`, `type-id` and `ownership`, plus any make, model, vendor, notes and rental dates the user gave.
**Step 6: Report**
Report the new unit's values and whether the write succeeded. Then read `procore-get-equipment-register` with the identification number and confirm it appears.
**Rules & Guidelines:**
* The only write tool you may call is `procore-create-equipment`, and only once, after the user confirms. Do not call any other create, update, delete, sync or bulk tool.
* Never invent an id, name or date. If a required value is missing or a lookup matches more than one record, ask.
* If the write fails, report the exact error and stop. Do not retry with changed values.
* Never guess the ownership, status or category.
**Validation:**
* If the identification number already exists, stop without writing.
* If the user says no, stop without writing.
Who it's for
One answer, three teams that use it
Fleet managers
Add machines without duplicates
Register a new unit knowing the number is unused and the category is the right one.
Register a new loader called Loader 9, number LD-009, category Earthmoving, type Wheel loader, owned.
Yard coordinators
Set up a rental on arrival
Put a rented machine into the register the day it arrives, with the status and ownership chosen explicitly.
Register rental crane CR-015, category Lifting, type Mobile crane, status active, from Contoso Crane Hire.
Equipment administrators
Keep categories consistent
Match every new unit to the register's own category and type lists so reports group machines correctly.
Add generator GN-031, category Power, type Diesel generator, and tell me which statuses I can start it in.
How it works
What PopdockAI does when you ask
You describe the machine and your AI assistant resolves the register values. Nothing is saved until you have confirmed the record, and it asks rather than guessing a missing value.
Ask
You give the name, identification number, category and type.
Check
It confirms the number is unused and matches the category and type.
Confirm
You choose the status and ownership, review the record and say yes.
Create
It adds one unit and reads the register back to confirm it.
What PopdockAI provides
The tools behind the answer
Ready made tools for Procore and one secure connection to your AI tool. No code, no exports.
procore-get-equipment-register
procore-get-equipment-register-types
procore-get-equipment-register-statuses
procore-get-equipment-register-makes
procore-get-equipment-register-models
procore-create-equipment
This report is built from Get data tools only. PopdockAI applies the row, field and parameter rules your admin sets, and every query is written to the audit trail.
The outcome
A clean equipment register from day one
Related use cases
More ways to put this data to work
One prompt template with infinite possibilities.
Your AI assistant adapts its approach, tone, and capabilities to match each unique context while you maintain a single, manageable workflow.
Join forward-thinking companies that are transforming their operations with intelligent, secure AI automation.

.webp)
