Connectors

/

Procore

/

Review Procore drawing register
Report

See which Procore drawings are current, stale or unpublished

For project teams who want the drawing register reviewed for stale and unpublished sheets, by asking their AI assistant.

Try PopdockAI free
Get a live demo
Review Procore drawing register
Review the drawing register for Riverside Tower, architectural discipline only, and show what is current, superseded or unpublished.
Riverside Tower has 112 architectural drawings, and 14 have issues. - Latest revision older than 90 days: 9 drawings - Unpublished drawings: 5, all in the Level 3 Fit-out set - Uploads not complete: 1 failed, 1 still processing - Most revised: A-301 Floor Plan Level 3, now at revision F Want the latest revision of each drawing with its date?
Procore
Sample figures. Your results come from your own account.
procore-get-viewer-documents-accessible-tools
procore-get-drawing-revisions
procore-get-drawing-sets
procore-get-drawing-areas
procore-get-drawing-disciplines
procore-get-drawing-uploads

On this page

The problem

The problem

The prompt

Who it's for

How it works

Tools used

Connector

Procore

Procore
Run it on your own Procore data.

Connect Procore, pick your AI tool and paste the prompt.

Try PopdockAI free

The problem

Crews build from stale drawings nobody knew were superseded

In Procore, drawing revisions, sets, areas and uploads sit on different screens, so nobody sees which sheets have unpublished or old revisions. Teams end up building from the wrong version.

Without PopdockAI

  • Open the drawing log and sort by revision
  • Open each set to count unpublished drawings
  • Check the upload queue for failures
  • Compare revision dates to spot old sheets

With PopdockAI

  • Revisions, sets, areas and disciplines are read together
  • The latest revision per drawing is shown with its date
  • Unpublished drawings and failed uploads are listed
  • Sheets older than 90 days are flagged

The prompt

Use this prompt

Copy it into any AI tool connected to PopdockAI. Swap the values in braces for your own.

Prompt
**Objective:** Review the drawing register of {project-name}, optionally only discipline {discipline-name}, and show what is current, superseded or unpublished.

**Step 1: Resolve the project**

Call `procore-get-viewer-documents-accessible-tools` with `project-name` equal to {project-name} to resolve the project id. If nothing matches, retry with `project-name.contains`. If more than one project matches, list them with their ids and stop and ask which one. If the user named a Procore company, pass it in the `company` parameter on every call.

**Step 2: Read the register**

Call `procore-get-drawing-revisions` with the `project-id` (and `discipline-name.contains` if {discipline-name} is given), then `procore-get-drawing-sets`, `procore-get-drawing-areas` and `procore-get-drawing-disciplines` with the `project-id`.

**Step 3: Check uploads**

Call `procore-get-drawing-uploads` with the `project-id` and note uploads whose `status` is not complete.

**Step 4: Report**

Output counts by discipline and area, the latest revision per drawing with its date, sets with unpublished drawing counts, and uploads still processing or failed. Flag drawings whose latest revision is older than 90 days.

**Rules & Guidelines:**

* This prompt is read-only. Never call any create, update, delete, bulk, send, restore or sync tool (for example `procore-create-rfi`, `procore-update-punch-item`, `procore-delete-incident` or `procore-send-punch-item-email`).
* Report only what the tools return. Do not guess missing dates, amounts or names; mark them as missing.
* Counts come from the records returned, and `max-records` caps each call, so say when a call returned its cap and the picture may be partial.

**Validation:**

* If the project cannot be resolved, stop and say so. Do not read records from an unresolved project.
* If the main read returns nothing, say the project has none and stop. Do not fill the gap with assumptions.

Who it's for

One answer, three teams that use it

Document controllers

Keep the register current

See unpublished drawings and failed uploads per set, so the register is cleaned up before the next issue.

Review the drawing register for Fabrikam Depot and list unpublished drawings by set.

Project engineers

Check a discipline before issue

Look at one discipline's latest revisions and dates before it goes out to the site.

Show the latest revision of every mechanical drawing on Contoso Warehouse with its date.

Site managers

Avoid building from old sheets

See which drawings have not been revised in over 90 days and which have newer unpublished ones.

On Northwind Plaza, which structural drawings have unpublished revisions?

How it works

What PopdockAI does when you ask

You name the project and your AI assistant reads the drawing register in Procore. It marks missing values, says when a read hit its cap and never publishes or sends a drawing.

Ask

You name the project, and optionally a discipline.

Your AI tool

Read

It resolves the project and reads the revisions, sets, areas and disciplines.

procore-get-viewer-documents-accessible-tools
procore-get-drawing-revisions
procore-get-drawing-sets
procore-get-drawing-areas
procore-get-drawing-disciplines
procore-get-drawing-uploads

Check

It checks the drawing uploads and notes any that are still processing or failed.

No items found.

Report

You get counts, the latest revision per drawing, unpublished counts per set and sheets older than 90 days.

Your AI tool

What PopdockAI provides

The tools behind the answer

Ready made tools for Procore and one secure connection to your AI tool. No code, no exports.

get-data

procore-get-viewer-documents-accessible-tools

Returns Procore viewer documents accessible tools records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
get-data

procore-get-drawing-revisions

Returns Procore drawing revisions records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
get-data

procore-get-drawing-sets

Returns Procore drawing sets records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
get-data

procore-get-drawing-areas

Returns Procore drawing areas records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
get-data

procore-get-drawing-disciplines

Returns Procore drawing disciplines records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
get-data

procore-get-drawing-uploads

Returns Procore drawing uploads records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
Read only.Nothing in Procore Changes

This report is built from Get data tools only. PopdockAI applies the row, field and parameter rules your admin sets, and every query is written to the audit trail.

How Popdock AI secures your data

The outcome

The right drawings in the right hands

Try PopdockAI free
Get a live demo

Related use cases

More ways to put this data to work

One prompt template with infinite possibilities.

‍

Your AI assistant adapts its approach, tone, and capabilities to match each unique context while you maintain a single, manageable workflow.

Join forward-thinking companies that are transforming their operations with intelligent, secure AI automation.

Try PopdockAI Free
See Documentation