Connectors

/

Procore

/

Review Procore project recycle bins
Report

Find mistakenly deleted RFIs, submittals and punch items

For project managers who want the recycle bins checked against live records for mistaken deletions, by asking their AI assistant.

Try PopdockAI free
Get a live demo
Review Procore project recycle bins
Check the recycle bins on Riverside Tower and tell me if anything looks deleted by mistake.
Riverside Tower has 9 deleted records in the recycle bins, and 3 have no live twin. - RFI-0042, Curtain wall anchors, open, no live RFI with that number - SUB-0118, Fire stopping samples, open, no live submittal with that number - Punch item 214, Level 3 door hardware, no live record, status closed Want the full tables for RFIs, submittals and punch items?
Procore
Sample figures. Your results come from your own account.
procore-get-viewer-documents-accessible-tools
procore-get-rfis-recycle-bin
procore-get-submittals-recycle-bin
procore-get-punch-items-recycle-bin
procore-get-rfis
procore-get-submittals
procore-get-punch-items

On this page

The problem

The problem

The prompt

Who it's for

How it works

Tools used

Connector

Procore

Procore
Run it on your own Procore data.

Connect Procore, pick your AI tool and paste the prompt.

Try PopdockAI free

The problem

A mistaken deletion shows up when the numbers do not add up

An RFI, submittal or punch item gets deleted by mistake and nobody sees it until the log has a gap. Finding it means reading three recycle bins and searching the live log for each record.

Without PopdockAI

  • Open the RFI recycle bin and note each record
  • Repeat for submittals and punch items
  • Search the live log for a record with the same number
  • Find out about a deletion when numbers do not match

With PopdockAI

  • All three recycle bins are read for the project
  • Each deleted record is checked for a live record with the same number
  • Deleted records with no live twin are flagged, open ones first
  • A restore is recommended only, never carried out

The prompt

Use this prompt

Copy it into any AI tool connected to PopdockAI. Swap the values in braces for your own.

Prompt
**Objective:** Review what is sitting in the recycle bins of {project-name} for RFIs, submittals and punch items, and say what looks deleted by mistake.

**Step 1: Resolve the project**

Call `procore-get-viewer-documents-accessible-tools` with `project-name` equal to {project-name} to resolve the project id. If nothing matches, retry with `project-name.contains`. If more than one project matches, list them with their ids and stop and ask which one. If the user named a Procore company, pass it in the `company` parameter on every call.

**Step 2: Read the bins**

Call `procore-get-rfis-recycle-bin`, `procore-get-submittals-recycle-bin` and `procore-get-punch-items-recycle-bin` with the `project-id`.

**Step 3: Check for the live twin**

For each deleted record, call `procore-get-rfis`, `procore-get-submittals` or `procore-get-punch-items` with the same `project-id` and check whether a live record with the same number or title exists.

**Step 4: Report**

Output a table per tool: number, title or subject, status, date created, created by, and whether a live record with the same number exists. Flag deleted records with no live twin, especially open ones, as likely mistakes.

**Rules & Guidelines:**

* This prompt is read-only. Never call any create, update, delete, bulk, send, restore or sync tool (for example `procore-create-rfi`, `procore-update-punch-item`, `procore-delete-incident` or `procore-send-punch-item-email`).
* Report only what the tools return. Do not guess missing dates, amounts or names; mark them as missing.
* Counts come from the records returned, and `max-records` caps each call, so say when a call returned its cap and the picture may be partial.
* Do not call any restore tool, including `procore-restore-project-form`. Recommend a restore in the report only.

**Validation:**

* If the project cannot be resolved, stop and say so. Do not read records from an unresolved project.
* If the main read returns nothing, say the project has none and stop. Do not fill the gap with assumptions.

Who it's for

One answer, three teams that use it

Project managers

Catch deletions early

See deleted RFIs, submittals and punch items that have no live twin, open ones first.

Check the recycle bins on Contoso Warehouse for RFIs or submittals deleted by mistake.

Document controllers

Keep the log numbers whole

Find gaps in RFI and submittal numbers caused by deletions, with who created each record.

List deleted submittals on Fabrikam Depot that have no live record with the same number.

Site superintendents

Check the punch list

See punch items sitting in the recycle bin with no live copy, so nothing falls off the list.

Are any punch items on Northwind Plaza in the recycle bin with no live record?

How it works

What PopdockAI does when you ask

You name the project and your AI assistant reads the bins and checks each record. It never restores anything, so the decision stays with you.

Ask

You name the project.

Your AI tool

Resolve

It finds the one matching project and stops to ask if several match.

procore-get-viewer-documents-accessible-tools
procore-get-rfis-recycle-bin
procore-get-submittals-recycle-bin
procore-get-punch-items-recycle-bin
procore-get-rfis
procore-get-submittals
procore-get-punch-items

Compare

It reads the three recycle bins and checks each deleted record for a live record with the same number.

No items found.

Report

It gives a table per record type and flags deleted records with no live twin.

Your AI tool

What PopdockAI provides

The tools behind the answer

Ready made tools for Procore and one secure connection to your AI tool. No code, no exports.

get-data

procore-get-viewer-documents-accessible-tools

Returns Procore viewer documents accessible tools records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
get-data

procore-get-rfis-recycle-bin

Returns Procore RFIs recycle bin records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
get-data

procore-get-submittals-recycle-bin

Returns Procore submittals recycle bin records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
get-data

procore-get-punch-items-recycle-bin

Returns Procore punch items recycle bin records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
get-data

procore-get-rfis

Returns Procore requests for information (RFIs) for a project, with status, due date and the responsible contractor.
get-data

procore-get-submittals

Returns submittals on a Procore project, with number, title, status, due date, responsible contractor and specification section. Filter by project name or submittal fields.
get-data

procore-get-punch-items

Returns Procore punch list items for a project, with status, assignee, due date and cost impact.
Read only.Nothing in Procore Changes

This report is built from Get data tools only. PopdockAI applies the row, field and parameter rules your admin sets, and every query is written to the audit trail.

How Popdock AI secures your data

The outcome

Mistaken deletions caught before they cause a gap

Try PopdockAI free
Get a live demo

Related use cases

More ways to put this data to work

One prompt template with infinite possibilities.

‍

Your AI assistant adapts its approach, tone, and capabilities to match each unique context while you maintain a single, manageable workflow.

Join forward-thinking companies that are transforming their operations with intelligent, secure AI automation.

Try PopdockAI Free
See Documentation