Connectors

/

Procore

/

Summarize Procore day on site
Report

Get one brief of the day on site from every Procore daily log

For site and operations teams who want a single summary of a day's Procore daily logs for one project by asking their AI assistant.

Try PopdockAI free
Get a live demo
Summarize Procore day on site
Summarise what happened on site at Riverside Tower on 2026-11-12.
On 2026-11-12 Riverside Tower had 46 workers for 368 man hours, one delay and no accidents. - Weather: overcast, 8C, light rain after 2pm - Equipment and deliveries: 3 pieces on site, 2 deliveries - Delay: 2 hours, crane held for wind - Safety violations and accidents: none logged Want the visitor and notes logs listed as well?
Procore
Sample figures. Your results come from your own account.
procore-get-viewer-documents-accessible-tools
procore-get-daily-logs-weather-logs
procore-get-manpower-logs
procore-get-equipment-logs
procore-get-delivery-logs
procore-get-visitor-logs
procore-get-delay-logs
procore-get-safety-violation-logs
procore-get-accident-logs
procore-get-notes-logs
procore-get-daily-log-headers
procore-get-manpower-logs-daily-totals

On this page

The problem

The problem

The prompt

Who it's for

How it works

Tools used

Connector

Procore

Procore
Run it on your own Procore data.

Connect Procore, pick your AI tool and paste the prompt.

Try PopdockAI free

The problem

One day on site means opening a dozen logs

Weather, manpower, equipment, deliveries, visitors, delays, safety and notes each have their own log. Pull them together by hand and a quiet log looks the same as one you never opened.

Without PopdockAI

  • Open each daily log type for the date
  • Note workers, hours, deliveries and delays as you go
  • Total manpower from the manpower log
  • Write the summary and hope no log was missed

With PopdockAI

  • Every daily log type is read for the date you name
  • Workers and man hours come from the daily totals
  • Empty log types are reported as none logged
  • Entries are never invented, and a record cap is flagged

The prompt

Use this prompt

Copy it into any AI tool connected to PopdockAI. Swap the values in braces for your own.

Prompt
**Objective:** Summarize what happened on site at {project-name} on {log-date}: weather, manpower, equipment, deliveries, visitors, delays and notes.

**Step 1: Resolve the project**

Call `procore-get-viewer-documents-accessible-tools` with `project-name` equal to {project-name} to resolve the project id. If nothing matches, retry with `project-name.contains`. If more than one project matches, list them with their ids and stop and ask which one. If the user named a Procore company, pass it in the `company` parameter on every call.

**Step 2: Pull each log type for the date**

With the `project-id` and `date.from` and `date.to` both set to {log-date}, call `procore-get-daily-logs-weather-logs`, `procore-get-manpower-logs`, `procore-get-equipment-logs`, `procore-get-delivery-logs`, `procore-get-visitor-logs`, `procore-get-delay-logs`, `procore-get-safety-violation-logs`, `procore-get-accident-logs` and `procore-get-notes-logs`. Also call `procore-get-daily-log-headers` with `log-date.from` and `log-date.to` set to the same date.

**Step 3: Add the totals**

Call `procore-get-manpower-logs-daily-totals` with the `project-id` for total workers and man hours.

**Step 4: Report**

Output a short brief: header status, weather, total workers and man hours, equipment on site, deliveries, visitors, delays with their cause, any safety violation or accident, and notes. Say 'none logged' for a log type with no entries, and never invent entries.

**Rules & Guidelines:**

* This prompt is read-only. Never call any create, update, delete, bulk, send, restore or sync tool (for example `procore-create-rfi`, `procore-update-punch-item`, `procore-delete-incident` or `procore-send-punch-item-email`).
* Report only what the tools return. Do not guess missing dates, amounts or names; mark them as missing.
* Counts come from the records returned, and `max-records` caps each call, so say when a call returned its cap and the picture may be partial.

**Validation:**

* If the project cannot be resolved, stop and say so. Do not read records from an unresolved project.
* If the main read returns nothing, say the project has none and stop. Do not fill the gap with assumptions.

Who it's for

One answer, three teams that use it

Superintendents

Write up the day in minutes

Get the day's weather, crews, deliveries and delays in one brief, instead of rebuilding it from each log before sign off.

Summarise yesterday on site at Fabrikam Depot, including delays and visitors.

Project managers

Brief the owner

Pull the key facts from a day's logs, with delays and their causes, ready to share in the weekly report.

What happened on Contoso Warehouse on 2026-11-10? Include manpower totals.

Safety managers

Check a day for incidents

See any safety violation or accident logged on a date, with clear confirmation where nothing was logged.

Were there any safety violations or accidents on Northwind Plaza on 2026-11-11?

How it works

What PopdockAI does when you ask

You name the project and the date. Your AI assistant reads each log type and writes one brief. It only reads and never edits a log.

Ask

You name the project and the date.

Your AI tool

Resolve

It finds the one matching project, stopping to ask if several match.

procore-get-viewer-documents-accessible-tools
procore-get-daily-logs-weather-logs
procore-get-manpower-logs
procore-get-equipment-logs
procore-get-delivery-logs
procore-get-visitor-logs
procore-get-delay-logs
procore-get-safety-violation-logs
procore-get-accident-logs
procore-get-notes-logs
procore-get-daily-log-headers
procore-get-manpower-logs-daily-totals

Pull

It reads weather, manpower, equipment, delivery, visitor, delay, safety, accident and notes logs for the date, plus the totals.

No items found.

Report

You get one brief with totals, and none logged for any empty log type.

Your AI tool

What PopdockAI provides

The tools behind the answer

Ready made tools for Procore and one secure connection to your AI tool. No code, no exports.

get-data

procore-get-viewer-documents-accessible-tools

Returns Procore viewer documents accessible tools records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
get-data

procore-get-daily-logs-weather-logs

Returns Procore daily logs weather logs records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
get-data

procore-get-manpower-logs

Returns Procore manpower log entries from daily logs, including the vendor and workers on site. Filter by project and date.
get-data

procore-get-equipment-logs

Returns equipment log records from Procore: the equipment, vendor and days logged on a project. Filter by project and date range.
get-data

procore-get-delivery-logs

Returns delivery log records from Procore daily logs: the supplier, contents and time of each delivery on a project. Filter by project and date range.
get-data

procore-get-visitor-logs

Returns Procore visitor logs records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
get-data

procore-get-delay-logs

Returns delay log records from Procore daily logs: the delay type, duration and notes on a project. Filter by project and date range.
get-data

procore-get-safety-violation-logs

Returns safety violation log records from Procore daily logs: the vendor, violation, status and date. Filter by project and date range.
get-data

procore-get-accident-logs

Returns Procore accident logs records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
get-data

procore-get-notes-logs

Returns notes log entries from Procore daily logs, with the date, author and note text. Filter by project and date range.
get-data

procore-get-daily-log-headers

Returns Procore daily log headers for a project, one row per log date. Filter by project and log date range.
get-data

procore-get-manpower-logs-daily-totals

Returns Procore manpower logs daily totals records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
Read only.Nothing in Procore Changes

This report is built from Get data tools only. PopdockAI applies the row, field and parameter rules your admin sets, and every query is written to the audit trail.

How Popdock AI secures your data

The outcome

The whole day on site in one readable brief

Try PopdockAI free
Get a live demo

Related use cases

More ways to put this data to work

One prompt template with infinite possibilities.

‍

Your AI assistant adapts its approach, tone, and capabilities to match each unique context while you maintain a single, manageable workflow.

Join forward-thinking companies that are transforming their operations with intelligent, secure AI automation.

Try PopdockAI Free
See Documentation