Connectors

/

Procore

/

Create Procore submittal register entry
Write

Add submittals to the Procore register with a free number

For project engineers and document controllers who want a submittal added to the register by asking their AI assistant.

Try PopdockAI free
Get a live demo
Create Procore submittal register entry
Add a submittal called Curtain wall shop drawings to Riverside Tower, use number 084113-01 if it is free.
Number 084113-01 is available on Riverside Tower and no submittal has that title. - Project: Riverside Tower - Number: 084113-01 (available) - Title: Curtain wall shop drawings Shall I add it to the register?
Procore
Sample figures. Your results come from your own account.
procore-get-viewer-documents-accessible-tools
procore-get-submittals-next-available-number
procore-get-submittals-check-number
procore-get-submittals
procore-create-submittals-on-a-project

On this page

The problem

The problem

The prompt

Who it's for

How it works

Tools used

Connector

Procore

Procore
Run it on your own Procore data.

Connect Procore, pick your AI tool and paste the prompt.

Try PopdockAI free

The problem

Submittal numbers collide in the register

Each register entry needs a number nobody has used and a title not already logged. Two entries with the same number or title confuse the design team about which package is under review.

Without PopdockAI

  • Look up the last number used on the project
  • Try a number and see if it is rejected
  • Search the register for the same title
  • Fix a duplicate once the reviewer has seen both

With PopdockAI

  • The next free number is read from the project
  • A number you choose is refused if it is taken
  • The same title is checked before anything is created
  • The new entry is read back with number and title

The prompt

Use this prompt

Copy it into any AI tool connected to PopdockAI. Swap the values in braces for your own.

Prompt
**Objective:** Add a submittal titled {title} to {project-name}, using number {number} or the project's next free number if blank.

**Step 1: Resolve the project**

Call `procore-get-viewer-documents-accessible-tools` with `project-name` equal to {project-name} to resolve the project id. If nothing matches, retry with `project-name.contains`. If more than one project matches, list them with their ids and stop and ask which one. If the user named a Procore company, pass it in the `company` parameter on every call.

**Step 2: Choose the number**

Call `procore-get-submittals-next-available-number` with the `project-id`. If {number} is given, call `procore-get-submittals-check-number` with `current-number` set to it and require `number-available` to be true; otherwise use `next-number`.

**Step 3: Check for a duplicate**

Call `procore-get-submittals` with the `project-id` and look for the same title.

**Step 4: Confirm and create**

Show the user the exact values you will send, the project, and anything you could not resolve, and ask for an explicit yes. Do not call the write tool until the user confirms in this conversation. Then call `procore-create-submittals-on-a-project` with the `project-id`, `number` and `title`.

**Step 5: Verify**

Call `procore-get-submittals` with the `project-id` and confirm the new submittal appears.

**Step 6: Report**

Report the new submittal number and title, or the exact error and why the number was refused.

**Rules & Guidelines:**

* The only write tool you may call is `procore-create-submittals-on-a-project`, and only once, after the user confirms. Do not call any other create, update, delete, send or bulk tool.
* Never invent an id, name or date. If a required value is missing or a lookup is ambiguous, ask.
* If the write fails, report the exact error and stop. Do not retry with changed values.
* Never reuse a number that is not available.

**Validation:**

* If the project cannot be resolved, stop and say so. Do not read records from an unresolved project.
* If the main read returns nothing, say the project has none and stop. Do not fill the gap with assumptions.

Who it's for

One answer, three teams that use it

Project engineers

Build the register faster

Add entries with a free number in a single message instead of checking the numbering and titles by hand.

Add a submittal titled Rooftop unit curbs to Fabrikam Depot and use the next free number.

Document controllers

Keep numbering clean

Chosen numbers are verified before use and refused if taken, so the register never holds two packages under one number.

Create a submittal on Contoso Warehouse titled Fire damper data sheets with number 233300-02, only if that number is available.

Design coordinators

Avoid reviewing the same package twice

A repeated title is flagged before it is added, so reviewers receive each package once.

Add Precast stair shop drawings to Northwind Plaza as a submittal and tell me if the title is already in the register.

How it works

What PopdockAI does when you ask

You give the title and optionally a number in plain words. Your AI assistant checks the number and title and creates one entry only after you have confirmed.

Ask

You give the submittal title, the project and optionally a number.

Your AI tool

Number

It finds the next free number, or checks that the one you gave is available.

procore-get-viewer-documents-accessible-tools
procore-get-submittals-next-available-number
procore-get-submittals-check-number
procore-get-submittals

Check

It looks for an existing submittal with the same title.

No items found.

Confirm

You see the number and title and say yes, then it creates the entry and reads it back.

Your AI tool

What PopdockAI provides

The tools behind the answer

Ready made tools for Procore and one secure connection to your AI tool. No code, no exports.

get-data

procore-get-viewer-documents-accessible-tools

Returns Procore viewer documents accessible tools records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
get-data

procore-get-submittals-next-available-number

Returns Procore submittals next available number records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
get-data

procore-get-submittals-check-number

Returns Procore submittals check number records from the Project Management area. Filter by project and by the record's own fields; reads only, nothing is changed.
get-data

procore-get-submittals

Returns submittals on a Procore project, with number, title, status, due date, responsible contractor and specification section. Filter by project name or submittal fields.
run-action

procore-create-submittals-on-a-project

Create submittals on a project in Procore, under submittals on a project (POST). This is a write tool: it is built Inactive and has not been run end to end through MCP, so test it in a Procore sandbox before switching it on.
Read only.Nothing in Procore Changes

This report is built from Get data tools only. PopdockAI applies the row, field and parameter rules your admin sets, and every query is written to the audit trail.

How Popdock AI secures your data

The outcome

A register without collisions or repeats

Try PopdockAI free
Get a live demo

Related use cases

More ways to put this data to work

One prompt template with infinite possibilities.

‍

Your AI assistant adapts its approach, tone, and capabilities to match each unique context while you maintain a single, manageable workflow.

Join forward-thinking companies that are transforming their operations with intelligent, secure AI automation.

Try PopdockAI Free
See Documentation