Connectors

/

Procore

/

Draft a Procore RFI from a Granola meeting question
Write
Cross-Connector

Turn a meeting question into a Procore RFI

For project teams who want an unanswered Granola meeting question raised as a Procore RFI, just by asking their AI assistant.

Try PopdockAI free
Get a live demo
Draft a Procore RFI from a Granola meeting question
In the Granola note for the Riverside Tower design meeting, find the open question about the level 3 slab edge and raise it as an RFI on Procore.
No RFI on Riverside Tower matches this question, so this will be a new one. - Subject: Level 3 slab edge detail at grid line C - Question: Asked by Sam Patel at 14:32, with a note of the meeting and date - Manager: Dana Whitfield (one exact match) - Assignee: Fabrikam Structural Shall I create it?
Procore
Sample figures. Your results come from your own account.
granola-get-note
granola-get-transcript
procore-get-rfis
procore-get-rfis-potential-rfi-managers
procore-get-rfis-potential-assignees
procore-create-rfi

On this page

The problem

The problem

The prompt

Who it's for

How it works

Tools used

Connector

Procore

Procore
Run it on your own Procore data.

Connect Procore, pick your AI tool and paste the prompt.

Try PopdockAI free

The problem

Meeting questions rarely become RFIs

A question raised in a meeting is easily forgotten, or becomes an RFI with the wrong people and a duplicate subject. Someone has to find it in the recording and check Procore before raising it.

Without PopdockAI

  • Search the meeting recording for the question
  • Check Procore for a similar RFI
  • Work out who the manager and assignee should be
  • Type the RFI and hope the wording is clear

With PopdockAI

  • Unanswered questions are found in the transcript and you pick one
  • Existing RFIs are checked for a similar subject
  • Manager and assignee are matched to real people, never guessed
  • You confirm the draft and the new RFI is read back

The prompt

Use this prompt

Copy it into any AI tool connected to PopdockAI. Swap the values in braces for your own.

Prompt
**Objective:** Find the open question in the Granola meeting whose title contains `{meeting-title}` (focus on `{question-hint}` if it is given) and, only after the user confirms the wording and the people, raise it as an RFI on the Procore project matching `{project-name}`.

**Servers:** this prompt uses tools from two servers, so both procore-project-management (Procore) and granola (Granola meeting notes) must be connected. Tools whose names start with procore are on procore-project-management; tools whose names start with granola are on granola.

**Step 1: Find the question in Granola**

Call `granola-get-note` (Granola) with `title.contains` = `{meeting-title}` and `max-records` 10. If more than one note comes back, list them and stop. Then call `granola-get-transcript` (Granola) with `note-id` = that id, and `text.contains` = `{question-hint}` if given, otherwise "?" , `max-records` 50. Pick the questions about drawings, specifications, materials, sequencing or scope that were left unanswered, with the speaker and `start_time`. Show up to five and ask the user to pick one. Stop until they answer.

**Step 2: Check Procore for a duplicate and find the project**

Call `procore-get-rfis` (Procore) with `project-name.contains` = `{project-name}` and `max-records` 100. Keep `project-id`. If the project name is ambiguous, list the names and stop. Compare the chosen question with `subject` on existing RFIs; if one looks the same, show it (`full-number`, `status`) and ask whether to continue.

**Step 3: Find the people**

Ask the user who the RFI manager and the assignee should be; do not guess. Call `procore-get-rfis-potential-rfi-managers` and `procore-get-rfis-potential-assignees` (Procore) with `project-id` and `name.contains` = the name they gave, and take `id`. If a name returns no match or several, show the candidates and stop.

**Step 4: Confirm before writing**

Show the draft: subject (under 100 characters), question body (the question as asked, then "Raised in meeting: <title>, <date>, by <speaker>"), manager name, assignee names. Do not set cost or schedule impact unless the meeting stated one. Create nothing until the user says yes.

**Step 5: Create and verify**

Call `procore-create-rfi` (Procore) with `project-id`, `subject`, `question-body`, `assignee-ids` and `rfi-manager-id`. Then call `procore-get-rfis` (Procore) filtered by `project-id` and report the new RFI's `full-number`, `status` and `due-date`.

**Rules & Guidelines:**

* `procore-get-rfis`, `procore-get-rfis-potential-rfi-managers`, `procore-get-rfis-potential-assignees` and `procore-create-rfi` are on Procore; `granola-get-note` and `granola-get-transcript` are on Granola.
* The only write allowed is `procore-create-rfi`, once, after the confirmation in Step 4. Do not call `procore-create-rfi-reply`, `procore-update-rfi` or any delete tool.

**Validation:**

* If `procore-create-rfi` is unavailable (the write tools may be switched off), give the draft as text for the user to enter in Procore.
* If no unanswered question is found, say so and stop.

Who it's for

One answer, three teams that use it

Project engineers

Raise RFIs straight from the meeting

Turn a question from the design meeting into an RFI without re-listening to the recording.

From the Granola note for the Fabrikam Depot coordination meeting, find the open question about the duct routing and draft an RFI.

Project managers

Make sure questions get an owner

Every question raised becomes an RFI with a named manager and assignee, so it cannot sit unanswered.

Find the unanswered questions in the Granola note titled Weekly OAC for Contoso Warehouse and let me pick one to raise as an RFI.

Design coordinators

Avoid duplicate RFIs

The subject is checked against existing RFIs before one is created.

Raise the question about the stair core finish from the Northwind Plaza Granola note as an RFI, unless one already exists.

How it works

What PopdockAI does when you ask

You name the meeting and project and your AI assistant finds the question and checks Procore. Nothing is created until you have seen the draft and said yes.

Ask

You name the Granola meeting and the Procore project, and optionally what the question was about.

Your AI tool

Check

It finds unanswered questions in the transcript, looks for similar RFIs and matches the manager and assignee you name.

granola-get-note
granola-get-transcript
procore-get-rfis
procore-get-rfis-potential-rfi-managers
procore-get-rfis-potential-assignees

Confirm

You see the draft subject, question, manager and assignees and say yes.

No items found.

Create

It creates the RFI once and reads Procore back to report its number, status and due date.

Your AI tool

What PopdockAI provides

The tools behind the answer

Ready made tools for Procore and one secure connection to your AI tool. No code, no exports.

get-data

granola-get-note

Returns Granola meeting notes with their summaries and metadata. Filter by date range, title or owner to find the meetings you need.
get-data

granola-get-transcript

Returns Granola transcript lines with speaker and timing for a meeting note.
get-data

procore-get-rfis

Returns Procore requests for information (RFIs) for a project, with status, due date and the responsible contractor.
get-data

procore-get-rfis-potential-rfi-managers

Returns the people who can be set as RFI manager on a Procore project. Filter by name.
get-data

procore-get-rfis-potential-assignees

Returns the people who can be assigned an RFI on a Procore project. Filter by name.
run-action

procore-create-rfi

Creates a request for information (RFI) on a Procore project, with subject, question, RFI manager and assignees. This is a write action and has not been tested end to end through MCP, so try it in a sandbox project first.
Read only.Nothing in Procore Changes

This report is built from Get data tools only. PopdockAI applies the row, field and parameter rules your admin sets, and every query is written to the audit trail.

How Popdock AI secures your data

The outcome

Every open question raised once, with the right people

Try PopdockAI free
Get a live demo

Related use cases

More ways to put this data to work

One prompt template with infinite possibilities.

‍

Your AI assistant adapts its approach, tone, and capabilities to match each unique context while you maintain a single, manageable workflow.

Join forward-thinking companies that are transforming their operations with intelligent, secure AI automation.

Try PopdockAI Free
See Documentation