Connectors

/

Sage Intacct

/

Open an Intacct project for a won Procore bid
Write
Cross-Connector

Open the Intacct project the day a Procore bid is won

For estimators and project managers who want a won bid turned into an Intacct project, and noted back in Procore, by asking their AI assistant.

Try PopdockAI free
Get a live demo
Open an Intacct project for a won Procore bid
Riverside Tower is won. Open an Intacct project for the Riverside Tower bid under the Commercial category, starting 2027-01-04, and note the id on the bid when it is done.
No Intacct project named Riverside Tower exists, and the customer is active, so this will be a new project. - Customer: Contoso Developments (active in Intacct) - Project: Riverside Tower, category Commercial - Start date: 2027-01-04 - Description: proposal total of 4,250,000 Shall I create it?
Sage Intacct
Sample figures. Your results come from your own account.
procore-get-estimating-bid-board-projects
sage-intacct-get-project
sage-intacct-get-customer
sage-intacct-create-project
procore-create-estimating-bid-board-projects-notes

On this page

The problem

The problem

The prompt

Who it's for

How it works

Tools used

Connector

Sage Intacct

Sage Intacct
Run it on your own Sage Intacct data.

Connect Sage Intacct, pick your AI tool and paste the prompt.

Try PopdockAI free

The problem

A won bid reaches accounting from memory

After a win, someone retypes the bid into Intacct, choosing the customer and name by hand. A typo, a missing customer or a second project for the same job follows, and the bid board never records which project it became.

Without PopdockAI

  • Read the won bid in Procore and note the customer and total
  • Search Intacct for a project and the customer by hand
  • Retype the name and create the project days later
  • Never go back to tell the bid board what it became

With PopdockAI

  • The bid is read from Procore and checked against Intacct first
  • A project that exists, or a missing or inactive customer, stops the job
  • You confirm the exact project before one Intacct write
  • A second yes notes the new project id on the bid

The prompt

Use this prompt

Copy it into any AI tool connected to PopdockAI. Swap the values in braces for your own.

Prompt
**Objective:** Open an Intacct project for the won bid board project `{bid-board-project-name}`, only if none exists, and after the user confirms; then record it on the bid board project.

**Step 1: Read the bid board project (Procore)**

Call `procore-get-estimating-bid-board-projects` with `name` set to `{bid-board-project-name}`. If more than one matches, list them and stop. Keep `id`, `name`, `status`, `customer-company-name`, `stats-total` and `due-date`.

**Step 2: Check Intacct**

Call `intacct-get-project` with `project-name` set to the project name, then `project-name.contains`. If a project exists, report its project-id, status and `contract-amount` and stop. Call `intacct-get-customer` with `customer-name` set to the customer company name; if it is missing or inactive, stop and tell the user to set the customer up first. Keep the customer-id.

**Step 3: Confirm, then create**

Show the project you would create: `name` set to the bid board project name, `customer-id` from Step 2, `category` set to `{category}`, `start-date` set to `{start-date}` if given, and the proposal total in `description`. Ask for an explicit yes. Only after a yes, call `intacct-create-project` once, then call `intacct-get-project` to read it back.

**Step 4: Note it in Procore**

Ask whether to record it. Only after a second yes, call `procore-create-estimating-bid-board-projects-notes` once with `bid-board-project-id` set to the id from Step 1 and `value` stating the new Intacct project-id.

**Rules & Guidelines:**

* Tools whose names start with procore are on the procore-preconstruction server. Tools whose names start with intacct are on the intacct server. Both servers must be connected.
* Writes allowed: one `intacct-create-project` after the first yes, and one `procore-create-estimating-bid-board-projects-notes` after the second yes. Do not call any other write tool, including `procore-update-bid-board-project`, `procore-delete-bid-board-project`, `intacct-update-project` or `intacct-create-customer`.
* Both write tools are built Inactive and untested end to end; if a call is rejected, report that and stop.

**Validation:**

* Never create a project when a name match exists.
* Do not create the project when the customer is missing or inactive in Intacct.
* If the user declines either step, make no call for it, and do not retry a failure.

Who it's for

One answer, three teams that use it

Estimators

Close the loop on a win

Turn a won bid into an Intacct project as soon as it is awarded, and have the new project id noted on the bid, without waiting for accounting.

The Fabrikam Depot bid is won. Open an Intacct project for it and note the id on the bid.

Project accountants

Start from a clean project record

Every new project is checked against existing names and an active customer, so costs do not split across two records.

Check whether Intacct already has a project for the Northwind Plaza bid, and if not, open one under Retail.

Preconstruction managers

See which bids became projects

The bid board note records the Intacct project id, so the hand-off from bid to accounting is visible on the bid itself.

Open the Intacct project for the Contoso Warehouse bid with a 2027-02-01 start, then ask me about the note.

How it works

What PopdockAI does when you ask

You name the won bid in plain words. Your AI assistant reads it in Procore, checks Intacct, and asks twice: once before creating the project and once before noting it on the bid.

Ask

You name the won bid board project and optionally a category and start date.

Your AI tool

Check

It reads the bid in Procore, then looks in Intacct for an existing project and an active customer.

procore-get-estimating-bid-board-projects
sage-intacct-get-project
sage-intacct-get-customer

Confirm

You see the project it would create and say yes.

No items found.

Record

It creates the Intacct project once, reads it back, and with a second yes notes the project id on the bid.

Your AI tool

What PopdockAI provides

The tools behind the answer

Ready made tools for Sage Intacct and one secure connection to your AI tool. No code, no exports.

get-data

procore-get-estimating-bid-board-projects

Returns Procore Preconstruction bid board projects, with status and the assigned estimator.
get-data

sage-intacct-get-project

Returns projects from Sage Intacct.
get-data

sage-intacct-get-customer

Returns customers from Sage Intacct.
run-action

sage-intacct-create-project

Creates a project in Sage Intacct Projects.
run-action

procore-create-estimating-bid-board-projects-notes

Adds a note to a Procore bid board project. Action tool: built Inactive and not yet run end to end through MCP, so test it against a sandbox Procore company before switching it on.
Read only.Nothing in Sage Intacct Changes

This report is built from Get data tools only. PopdockAI applies the row, field and parameter rules your admin sets, and every query is written to the audit trail.

How Popdock AI secures your data

The outcome

One project per won bid, linked back to the bid

Try PopdockAI free
Get a live demo

Related use cases

More ways to put this data to work

One prompt template with infinite possibilities.

‍

Your AI assistant adapts its approach, tone, and capabilities to match each unique context while you maintain a single, manageable workflow.

Join forward-thinking companies that are transforming their operations with intelligent, secure AI automation.

Try PopdockAI Free
See Documentation