Connectors

/

Sage Intacct

/

Create an Intacct project from a Procore project
Write
Cross-Connector

Open the Intacct project for a Procore project, once

For accountants who want an Intacct project created from a Procore project, without retyping, just by asking their AI assistant.

Try PopdockAI free
Get a live demo
Create an Intacct project from a Procore project
Procore project 24-118 needs an Intacct project in category Construction for customer CUST-2041. Check Intacct and set it up if it is missing.
Procore project 24-118 is Riverside Tower, and Intacct has no project with that id or name. - Name: Riverside Tower - Project id: 24-118 - Category: Construction - Customer: CUST-2041, found in Intacct Shall I create it?
Sage Intacct
Sample figures. Your results come from your own account.
procore-get-correspondence-type-items
procore-get-generic-tools-generic-tool-items
sage-intacct-get-project
sage-intacct-get-customer
sage-intacct-create-project

On this page

The problem

The problem

The prompt

Who it's for

How it works

Tools used

Connector

Sage Intacct

Sage Intacct
Run it on your own Sage Intacct data.

Connect Sage Intacct, pick your AI tool and paste the prompt.

Try PopdockAI free

The problem

Re-typing a project into Intacct invites typos and duplicates

A new Procore project needs a matching Intacct project before any cost can post. Keying the name and number by hand risks typos and duplicates, and nobody checks if one already exists.

Without PopdockAI

  • Open the Procore project for its name and number
  • Search Intacct to see if it already exists
  • Retype the details into a new Intacct project
  • Fix the typo or the duplicate later

With PopdockAI

  • The name and accounting number come straight from Procore
  • Intacct is checked by id and name, and any match stops the run
  • A given customer id is verified, and no customer, manager or dates are invented
  • You confirm the exact record, then it is created once and read back

The prompt

Use this prompt

Copy it into any AI tool connected to PopdockAI. Swap the values in braces for your own.

Prompt
**Objective:** Make sure Procore project `{project-number}` has an Intacct project, and if it has none, create one in category `{project-category}` (for customer `{customer-id}` if given) after the user confirms.

**Servers:** this prompt uses tools from two servers, so both procore-company-admin (Procore) and intacct (Intacct) must be connected. Tools whose names start with procore are on procore-company-admin; tools whose names start with intacct are on intacct.

**Step 1: Read the Procore project**

Call `procore-get-correspondence-type-items` (Procore) filtered by `project-number`, `max-records` 5. If nothing comes back, call `procore-get-generic-tools-generic-tool-items` (Procore) the same way. Take the project name and the project accounting project number. If neither tool returns the project, report that and stop.

**Step 2: Check Intacct**

Call `intacct-get-project` (Intacct) with the accounting project number as `project-id`; if there is none, with the project name as `project-name`. If a project is found, show it and stop; do not create anything. If a customer id was given, call `intacct-get-customer` (Intacct) with it as `customer-id` and stop if it does not exist.

**Step 3: Confirm, then create**

Show the user exactly what will be created: name, project id (the accounting number, or empty so Intacct assigns one), the category and the customer id if given. Ask for an explicit yes. Only after a yes, call `intacct-create-project` (Intacct) once with those values. Then call `intacct-get-project` again with the same id or name and show the stored record.

**Rules & Guidelines:**

* `intacct-create-project` is the only write tool this prompt may call, at most once, and never before the user confirms. Never call any Procore tool that creates, updates or deletes.
* Do not invent a customer, manager or dates; leave them out unless the user supplied them.

**Validation:**

* If the user declines or does not answer, make no change and say so.
* If the creation call returns an error or the follow-up read finds nothing, report it and do not retry.

Who it's for

One answer, three teams that use it

Project accountants

Open projects without retyping

Create the Intacct project from the Procore record so the name and number match, and costs can post from the start.

Create an Intacct project for Procore project 24-118 in category Construction if it does not exist.

Project managers

Get a new job ready for cost

Ask for the accounting setup yourself, and see Intacct's existing project if one is already there.

Check whether Contoso Medical Centre, project number 25-007, is in Intacct, and set it up in category Healthcare if not.

Finance administrators

Keep the project list clean

Stop duplicate projects by checking id and name before anything is created, and by confirming the customer first.

Set up Procore project 24-203 in Intacct for customer CUST-1180 in category Construction, after checking it is not there.

How it works

What PopdockAI does when you ask

You give the project number and category. Your AI assistant checks Intacct first, shows you the record and creates it once, only after your yes.

Ask

You give the Procore project number, the category and, if needed, a customer id.

Your AI tool

Check

It reads the project from Procore and checks Intacct by id and name, stopping if one exists.

procore-get-correspondence-type-items
procore-get-generic-tools-generic-tool-items
sage-intacct-get-project
sage-intacct-get-customer

Confirm

You see the name, project id, category and customer it will create and say yes.

No items found.

Create

It creates the project once and reads it back to show the stored record.

Your AI tool

What PopdockAI provides

The tools behind the answer

Ready made tools for Sage Intacct and one secure connection to your AI tool. No code, no exports.

get-data

procore-get-correspondence-type-items

Procore: Returns correspondence type items records from the Procore connector.
get-data

procore-get-generic-tools-generic-tool-items

Returns generic tool items from Procore, including project number and accounting project number, with filters such as project number. Read-only.
get-data

sage-intacct-get-project

Returns projects from Sage Intacct.
get-data

sage-intacct-get-customer

Returns customers from Sage Intacct.
run-action

sage-intacct-create-project

Creates a project in Sage Intacct Projects.
Read only.Nothing in Sage Intacct Changes

This report is built from Get data tools only. PopdockAI applies the row, field and parameter rules your admin sets, and every query is written to the audit trail.

How Popdock AI secures your data

The outcome

One Intacct project per Procore project, set up right

Try PopdockAI free
Get a live demo

Related use cases

More ways to put this data to work

One prompt template with infinite possibilities.

‍

Your AI assistant adapts its approach, tone, and capabilities to match each unique context while you maintain a single, manageable workflow.

Join forward-thinking companies that are transforming their operations with intelligent, secure AI automation.

Try PopdockAI Free
See Documentation